Xiaomi Camera 360 Hacks (MJSXJxxCM)

• Supported Cameras
• Features
• Install Instructions

Keep calm and follow the procedure!

Warning: The method need to disassemble the camera and it brokes warranty.

Supported Cameras

For now this is it, I'm working on supporting more cameras.

Model Name(s)	Picture	Model Type	Uart
MJXJ03CM		IPC003	uart
MJSXJ01CM		IPC003	uart
MJSXJ02CM		IPC009	uart
MJSXJ03CM		IPC007A	uart
MJSXJ05CM		IPC019	uart
MJSXJ06CM		IPC021	uart
MJSXJ09CM		IPC029A	uart

• Supported Cameras
• Features
• Install Instructions

Features

Feature	Telnet Server	Onvif Server	RTSP Server	SSH Server	Web Configuration Server
MJXJ03CM	[x]
MJSXJ02CM	[x]	[x]	[x]		[x]
MJSXJ05CM	[x]		[x]
MJSXJ06CM	[x]
MJSXJ09CM	[x]

Install Instructions

1. According the model name and model type, download the rootfs_new.bin to sdcard (32GB, formated single partition with FAT32) then put into camera.
2. Wire out the UART and connect the uart of the camera via USB2TTL (115200, 8n1)
3. Stop uboot via keeping 'Enter' pressed then power up the camera.
4. Flash the hacked rootfs, enter the following commands after the prompt 'SigmaStar #' or 'GM #' of uboot shell.

MJSXJ02CM

fatload mmc 0:1 0x21000000 rootfs_new.bin
sf probe
sf erase 0x260000 0x674000
sf write 0x21000000 0x260000 0x674000
reset

MJSXJ05CM

fatload mmc 0:1 0x21000000 rootfs_new.bin
sf probe
sf erase 0x250000 0x69E000
sf write 0x21000000 0x250000 0x69E000
reset

MJSXJ06CM

fatload mmc 0:1 0x21000000 rootfs_new.bin
sf probe
sf erase 0x250000 0x69E000
sf write 0x21000000 0x250000 0x69E000
reset

5. enjoy the firmware with telnet enabled

Install the hack apps

unzip the ipcxx_hacks.zip to sdcard

Restore to original firmware

Manual