An integration driver for the Unfolded Circle Remote 2/3 that exposes a media_player entity for switching inputs on a Games Care RGB Switch.
Supports up to 4 boards (32 ports) via extension boards. Each input port can be given a custom name during setup.
- media_player entity with named inputs for clean, readable switching
- Supports 1–4 boards (8, 16, 24, or 32 ports)
- Custom port names set during setup (e.g. "PS2", "GameCube", "SNES")
- Reconfigure at any time to rename ports
- Runs directly on the UCR2/3 remote — no external server needed
Go to the Releases page and download uc-intg-gamescarergb-*-aarch64.tar.gz.
- Open your remote's web interface at
http://your-remote-ip - Go to Integrations → Add new → Install custom
- Select the downloaded
uc-intg-gamescarergb-*-aarch64.tar.gzfile - Wait for the upload to complete
- The integration will appear in your integrations list — click it and select Start setup
- Enter the IP address or hostname of your switch (e.g.
192.168.1.100) - Give it a friendly name (e.g.
Living Room Switch) - Enter the number of extension boards (0 for a single 8-port board)
- On the next screen, name each of your inputs (e.g. "PS2", "GameCube", "SNES")
- Click Finish — the select entity will appear ready to use
To rename inputs, go to the integration in your remote's settings and select Reconfigure. Your existing names will be pre-filled.
- The switch communicates over plain HTTP on port 80 — no SSL
- Port 0 is the Auto mode (no forced input) which is also configured as "Power Off" as it turns off the bright blue LED indicators
- The remote tracks the active input in memory; it resets to Auto if the integration restarts