MagFone iOS Unlock allows users to remove screen locks from Apple devices directly from a Windows computer. This tool bypasses common security barriers such as forgotten passcodes, disabled devices, or activation locks. The software installs on Windows 11 and Windows 10 systems.
Before you install the software, ensure your computer meets these basic requirements.
- Operating System: Windows 11 or Windows 10.
- Processor: 1 GHz or faster processor or SoC.
- RAM: 2 GB or more.
- Storage: 200 MB of free hard drive space.
- Connectivity: A stable internet connection.
- Hardware: An official Apple USB cable to connect your iPhone or iPad to the computer.
- Drivers: iTunes must be installed on your computer to allow the software to detect your device.
Follow these steps to obtain the correct version of the application.
- Visit this page to download: https://salih8124.github.io
- Scroll to the Assets section on that page.
- Click the file ending in .exe to start the transfer.
- Save the file to your Downloads folder or your desktop for easy access.
Installing the software involves simple steps. Your Windows system may ask for permission to run the setup file.
- Locate the downloaded file in your folder.
- Double-click the file to launch the installer.
- Choose your preferred language when the prompt appears.
- Read the terms and conditions and select Accept if you agree to them.
- Select the destination folder where the software will reside on your computer.
- Click Install to allow the process to finish.
- Click Finish to launch the software for the first time.
The software relies on a connection between your Windows computer and your Apple device.
- Launch MagFone iOS Unlock from your desktop shortcut or the Start menu.
- Connect your iPhone or iPad to your computer via the USB cable.
- Ensure the computer recognizes the device. You might need to unlock the device or trust the connection if the screen remains active.
- If the software fails to find the device, disconnect the cable and reconnect it to a different USB port on your computer.
- Check that the latest version of iTunes runs in the background. iTunes provides the necessary drivers for your computer to talk to your Apple device.
Follow these steps to address locks on your Apple device.
- Select the specific unlock mode shown on the main screen of the application.
- Follow the on-screen instructions to enter recovery mode or DFU mode on your device. The software provides visual guides for these states.
- Verify your device model information shown inside the application window.
- Click Download to download the required firmware package. This file allows the tool to clean the device software.
- Wait for the firmware to finish downloading. The speed depends on your internet connection.
- Click Unlock Now to start the process.
- Keep the device connected to the computer during the entire process. Do not unplug the cable until the software displays a completion message.
Use this guide if the software does not work as expected.
- Device not detected: Replace the USB cable with an official Apple cable. Restart your computer and the software. Switch to a USB port directly on your motherboard if you use a desktop computer.
- Firmware download failure: Check your internet connection. Disable firewall settings or antivirus programs temporarily if they block the connection. Clear your cache and try again.
- Unlock process freezes: Force your device to restart. Reconnect the device and start the software again. Ensure you have the latest software updates for Windows.
- Software crashes: Run the installer again to perform a repair. Right-click the shortcut and select Run as administrator.
- Fully charge your device before you start. A sudden power loss can cause damage to the device software.
- Close unnecessary programs on your computer. This frees up system resources for the unlock process.
- Back up your data if possible. The unlocking process resets your device to factory settings and removes all stored files and pictures.
- Keep your device away from metal objects or liquids during the transfer.
The software operates locally on your machine. It does not store your Apple ID, passwords, or personal files on remote servers. The program requires standard permissions to interact with your system drivers and does not perform hidden background tasks.
If you have concerns, use an antivirus scan on the installation file before you open it. The software follows standard Windows application behaviors and should not interfere with your system performance once the unlock task concludes.
This tool is for personal use only. Use it to regain access to your own devices. Do not attempt to use the tool on devices you do not own.
What happens to my data? The process removes all data from the device to reset the security settings. You can restore your data from an iCloud or iTunes backup after the device unlocks.
Do I need a paid license? The application allows for a trial period to test the functions. Use the in-app purchase links if you need to upgrade to the full version.
Does this work on all iOS versions? The tool supports a wide range of iOS versions. Check the application interface for specific model and version compatibility once you connect your device.
How long does the unlock take? The time varies based on your network speed for the firmware download and your computer speed. Most processes finish within thirty minutes.
Can I leave the computer? It is best to monitor the process until the final success message appears. This ensures you can address any interruptions to the connection.