Controls Denon AV receivers and processors from Home Assistant through their RS-232 port and a serial-to-IP bridge — typically the Unfolded Circle Dock 3 (external port 2, TCP 5000), but also Global Caché IP2SL/iTach, USR-TCP232, ser2net…
Built and tested with the RS-232 commands of the Denon AVP-A1HD (with the 2011 "3D upgrade"). It works with other Denon units of the same generation that use the same ASCII protocol (AVC-A1HD, AVR-3808CI / 4308CI / 5308CI…) — see the compatibility table of the sister project uc-integration-denon-rs232.
- Local push: the unit reports every change by itself; Home Assistant is updated in real time (one safety refresh every 30 s).
- Shares the bridge with the Unfolded Circle Remote: the Dock 3 accepts several TCP clients at once and forwards the unit's replies to all of them, so this integration and the Remote 3 integration can run side by side.
| Type | Entities |
|---|---|
| Media player | Power, volume, mute, source, sound mode |
| Number | Master volume (dB); channel level trims −12…+12 dB: FL, C, FR, SL, SR, SBL, SBR, SW1, SW2 (SW3, SB, front height/wide and transducer available, disabled by default) |
| Select | Source, surround mode, input mode, quick select, Room EQ, Dynamic EQ, Dynamic Volume, Reference Level, audio restorer (+ DSX, PLIIz gain, PL mode, DRC, D.COMP, zone sources, disabled by default) |
| Switch | Power, mute, Cinema EQ, Tone Defeat (+ PLIIz height, main zone, zones 2/3/4, disabled by default) |
| Button | Volume up / down, Quick 1 / 2 / 3 |
| Sensor | Volume (dB), current source, surround mode, input mode, audio format (Dolby TrueHD, DTS-HD MA, PCM…) |
Choosing a Dynamic Volume level (Day / Evening / Midnight) switches Dynamic EQ to "Dynamic EQ + Volume" first: the unit ignores the level otherwise.
- HACS → ⋮ → Custom repositories → add
https://github.com/run51/hass-denon-rs232, category Integration. - Install Denon AV receivers & processors (RS-232), then restart Home Assistant.
- Settings → Devices & services → Add integration → Denon AV receivers & processors (RS-232).
Copy custom_components/denon_rs232 into your Home Assistant config/custom_components/
folder and restart.
- Bridge IP address: the address of the dock / bridge (not of the Denon).
- TCP port:
5000for the Dock 3 (external port 2).
The setup checks that the Denon answers PW? before saving.
Hardware notes (cable pinout, dock settings) are in the Remote 3 integration README.
uv venv -p 3.13 .venv
uv pip install -p .venv/bin/python pytest-homeassistant-custom-component
.venv/bin/python -m pytestThe tests run the integration against tests/denon_simulator.py, a fake Denon over TCP.
The protocol library (custom_components/denon_rs232/denon_control) is shared with the
Remote 3 integration.
License: MPL-2.0.