Snips integration with Home Assistant on Raspberry Pi.
For a detailed tutorial, check out our blog post: Integrating Snips with Home Assistant.
Check out the Getting Started Guide for setting up Home Assistant on a Raspberry Pi.
Once set up, copy snips.py to your local custom_components folder:
$ scp snips.py pi@pi_hostname:/home/homeassistant/.homeassistant/custom_componentsBy default, the Snips MQTT broker runs on port 9898. We should tell Home Assistant to use this as a broker (rather than its own), by adding the following section to configuration.yaml:
mqtt:
broker: 127.0.0.1
port: 9898The Snips Voice Platform is installed with the following command:
$ curl https://install.snips.ai -sSf | shSnips assistants are created via the Snips Console. Once trained, the assistant should be downloaded and copied to the Raspberry Pi
$ scp assistantproj_XXX.zip pi@pi_hostname:/home/pi/assistant.zipand installed locally on the Raspberry Pi via the snips-install-assistant helper script:
$ ssh pi@pi_hostname
$ sudo snips-install-assistant assistant.zipMake sure that a microphone is plugged to the Raspberry Pi, and start the Snips Voice Platform using the snips command:
$ snipsIn Home Assistant, we trigger actions based on intents produced by Snips. This is done in configuration.yaml. For instance, the following block handles ActivateLightColors intents (included in the Snips IoT intent bundle) to change light colors in the house:
snips:
intents:
ActivateLightColor:
action:
- service: light.turn_on
data_template:
entity_id: light.{{ objectLocation | replace(" ","_") }}
color_name: {{ objectColor }}Please file issues on the Issue Tracker, or get in touch directly on our Snips Slack Channel.