Skip to content

About

It’s a code to harness the Octopus PowerUP event (NOT FULLY TESTED) it dumps the battery before the event and then charges up during the event after the event is complete it’s rests waiting for you to press it for the next event.

Resources

Stars

0 stars

Watchers

1 watching

Forks

Latest commit

 

History

5 Commits

Folders and files

NameName
Last commit message
Last commit date
 
 
 
 

Repository files navigation

Overview

The flow is structured to monitor the state of charge (SOC) of a battery, adjust power set points for charging and discharging, and handle manual operations via injection nodes. It includes functionalities for sending notifications using Pushover. Nodes Breakdown

Battery SOC Input (victron-input-battery) Purpose: Monitors the state of charge of the battery. Wires to: a826ca07a7e68bc1 (SOC Change Node).

Grid Setpoint Input (victron-input-ess) Purpose: Monitors the setpoint for AC power. Wires to: 4aa09e3fb48cf9a3 (Setpoint Change Node).

Change Nodes (change) Two nodes (a826ca07a7e68bc1 and 4aa09e3fb48cf9a3) set flow context variables: soc: Set to the value of payload from the battery input. setpoint: Set to the value of payload from the grid setpoint input.

Inject Nodes Used for triggering events at specific times or manually: Power Up Session Complete: Sets the system to a resting state. Power UP Discharging: Injects a discharge value. Power UP Charging: Injects a charge value. Power Up Start Session: Activates manual control. Power UP Manual Stop: Stops the manual operation.

Function Nodes Power UP Discharge: Logic for managing the discharging process based on SOC and time. It adjusts the setpoint based on SOC thresholds. Power UP Charge: Similar logic for charging, adjusting based on time and SOC. Set Manual Start: Activates manual control by setting flags. SOC Monitoring: Monitors SOC and sends notifications if certain conditions are met. Power UP Session Complete: Resets the system state after a session. Rest For Next Power UP Session: Prepares the system for the next session when manual stop is invoked.

Output Nodes Pushover Nodes: Send notifications for various states like starting a discharging session or manual activation. Victron Output ESS: Writes the current setpoint back to the Victron system.

Delay Nodes Used to throttle the rate of message sending or to introduce pauses.

Logic Flow

Monitoring SOC & Setpoint: The flow continuously monitors the battery's state of charge and the current grid setpoint. When SOC changes or a new setpoint is injected, it updates the respective flow context variables.

Injecting Commands: Specific commands for discharging, charging, and stopping can be injected at predefined times or triggered manually.

Conditional Logic in Functions: The function nodes utilize conditions based on time and SOC: For example, if SOC exceeds a threshold, the system will change the setpoint accordingly. This is to prevent over-discharge or under-charge scenarios.

Notifications: Notifications are sent out at critical stages, like starting or stopping a session, keeping the user informed of system states.

Session Management: The flow has provisions for manual operation, allowing the user to start or stop operations and reset the system states as needed.

Conclusion

This Node-RED flow is a comprehensive management system for a battery charging and discharging process, utilizing Victron devices. It combines real-time monitoring, conditional logic, and user-triggered actions to optimize battery usage while providing notifications for transpare

About

It’s a code to harness the Octopus PowerUP event (NOT FULLY TESTED) it dumps the battery before the event and then charges up during the event after the event is complete it’s rests waiting for you to press it for the next event.

Resources

Stars

0 stars

Watchers

1 watching

Forks

Releases

Packages

Contributors