Dockerfile.ci

# syntax=docker/dockerfile:1.4
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied.  See the License for the
# specific language governing permissions and limitations
# under the License.
#
# WARNING: THIS DOCKERFILE IS NOT INTENDED FOR PRODUCTION USE OR DEPLOYMENT.
#
# PYTHON_LTO: Controls whether Python is built with Link-Time Optimization (LTO).
#
# Link-Time Optimization uses MD5 checksums during the compilation process to verify
# object files and intermediate representations. In FIPS-compliant environments, MD5
# is blocked as it's not an approved cryptographic algorithm (see FIPS 140-2/140-3).
# This can cause Python builds with LTO to fail when FIPS mode is enabled.
#
# When building FIPS-compliant images, set this to "false" to disable LTO:
#   docker build --build-arg PYTHON_LTO="false" ...
#
# Default: "true" (LTO enabled for better performance)
#
# Related: https://github.com/apache/airflow/issues/58337
ARG PYTHON_LTO="true"
ARG BASE_IMAGE="debian:bookworm-slim"

##############################################################################################
# This is the script image where we keep all inlined bash scripts needed in other segments
# We use BASE_IMAGE to make sure that the scripts are different for different platforms.
##############################################################################################
FROM ${BASE_IMAGE} as scripts

##############################################################################################
# Please DO NOT modify the inlined scripts manually. The content of those files will be
# replaced by prek automatically from the "scripts/docker/" folder.
# This is done in order to avoid problems with caching and file permissions and in order to
# make the PROD Dockerfile standalone
##############################################################################################

# The content below is automatically copied from scripts/docker/install_os_dependencies.sh
COPY <<"EOF" /install_os_dependencies.sh
#!/usr/bin/env bash
set -euo pipefail

if [[ "$#" != 1 ]]; then
    echo
    echo "ERROR! There should be 'runtime', 'ci' or 'dev' parameter passed as argument.".
    echo
    exit 1
fi

AIRFLOW_PYTHON_VERSION=${AIRFLOW_PYTHON_VERSION:-3.10.18}
PYTHON_LTO=${PYTHON_LTO:-true}
GOLANG_MAJOR_MINOR_VERSION=${GOLANG_MAJOR_MINOR_VERSION:-1.24.4}
COSIGN_VERSION=${COSIGN_VERSION:-3.0.5}

if [[ "${1}" == "runtime" ]]; then
    INSTALLATION_TYPE="RUNTIME"
elif   [[ "${1}" == "dev" ]]; then
    INSTALLATION_TYPE="DEV"
elif   [[ "${1}" == "ci" ]]; then
    INSTALLATION_TYPE="CI"
else
    echo
    echo "ERROR! Wrong argument. Passed ${1} and it should be one of 'runtime', 'ci' or 'dev'.".
    echo
    exit 1
fi

function get_dev_apt_deps() {
    if [[ "${DEV_APT_DEPS=}" == "" ]]; then
        DEV_APT_DEPS="\
apt-transport-https \
apt-utils \
build-essential \
dirmngr \
freetds-bin \
freetds-dev \
git \
graphviz \
graphviz-dev \
krb5-user \
lcov \
ldap-utils \
libbluetooth-dev \
libbz2-dev \
libc6-dev \
libdb-dev \
libev-dev \
libev4 \
libffi-dev \
libgdbm-compat-dev \
libgdbm-dev \
libgeos-dev \
libkrb5-dev \
libldap2-dev \
libleveldb-dev \
libleveldb1d \
liblzma-dev \
libncurses5-dev \
libreadline6-dev \
libsasl2-2 \
libsasl2-dev \
libsasl2-modules \
libsqlite3-dev \
libssl-dev \
libxmlsec1 \
libxmlsec1-dev \
libzstd-dev \
locales \
lsb-release \
lzma \
lzma-dev \
openssh-client \
openssl \
pkg-config \
pkgconf \
sasl2-bin \
sqlite3 \
sudo \
tk-dev \
unixodbc \
unixodbc-dev \
uuid-dev \
wget \
xz-utils \
zlib1g-dev \
"
        export DEV_APT_DEPS
    fi
}

function get_runtime_apt_deps() {
    local debian_version
    local debian_version_apt_deps
    # Get debian version without installing lsb_release
    # shellcheck disable=SC1091
    debian_version=$(. /etc/os-release;   printf '%s\n' "$VERSION_CODENAME";)
    echo
    echo "DEBIAN CODENAME: ${debian_version}"
    echo
    debian_version_apt_deps="\
libffi8 \
libldap-2.5-0 \
libssl3 \
netcat-openbsd\
"
    echo
    echo "APPLIED INSTALLATION CONFIGURATION FOR DEBIAN VERSION: ${debian_version}"
    echo
    if [[ "${RUNTIME_APT_DEPS=}" == "" ]]; then
        RUNTIME_APT_DEPS="\
${debian_version_apt_deps} \
apt-transport-https \
apt-utils \
curl \
dumb-init \
freetds-bin \
git \
gnupg \
iputils-ping \
krb5-user \
ldap-utils \
libev4 \
libgeos-dev \
libsasl2-2 \
libsasl2-modules \
libxmlsec1 \
locales \
lsb-release \
openssh-client \
rsync \
sasl2-bin \
sqlite3 \
sudo \
unixodbc \
wget\
"
        export RUNTIME_APT_DEPS
    fi
}

function install_docker_cli() {
    apt-get update
    apt-get install ca-certificates curl
    install -m 0755 -d /etc/apt/keyrings
    curl -fsSL https://download.docker.com/linux/debian/gpg -o /etc/apt/keyrings/docker.asc
    chmod a+r /etc/apt/keyrings/docker.asc
    # shellcheck disable=SC1091
    echo \
      "deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.asc] https://download.docker.com/linux/debian \
      $(. /etc/os-release && echo "$VERSION_CODENAME") stable" | \
      tee /etc/apt/sources.list.d/docker.list > /dev/null
    apt-get update
    apt-get install -y --no-install-recommends docker-ce-cli
}

function install_debian_dev_dependencies() {
    apt-get update
    apt-get install -yqq --no-install-recommends apt-utils >/dev/null 2>&1
    apt-get install -y --no-install-recommends wget curl gnupg2 lsb-release ca-certificates
    # shellcheck disable=SC2086
    export ${ADDITIONAL_DEV_APT_ENV?}
    if [[ ${DEV_APT_COMMAND} != "" ]]; then
        bash -o pipefail -o errexit -o nounset -o nolog -c "${DEV_APT_COMMAND}"
    fi
    if [[ ${ADDITIONAL_DEV_APT_COMMAND} != "" ]]; then
        bash -o pipefail -o errexit -o nounset -o nolog -c "${ADDITIONAL_DEV_APT_COMMAND}"
    fi
    apt-get update
    local debian_version
    local debian_version_apt_deps
    # Get debian version without installing lsb_release
    # shellcheck disable=SC1091
    debian_version=$(. /etc/os-release;   printf '%s\n' "$VERSION_CODENAME";)
    echo
    echo "DEBIAN CODENAME: ${debian_version}"
    echo
    # shellcheck disable=SC2086
    apt-get install -y --no-install-recommends ${DEV_APT_DEPS}
}

function install_additional_dev_dependencies() {
    if [[ "${ADDITIONAL_DEV_APT_DEPS=}" != "" ]]; then
        # shellcheck disable=SC2086
        apt-get install -y --no-install-recommends ${ADDITIONAL_DEV_APT_DEPS}
    fi
}

function link_python() {
    # link python binaries to /usr/local/bin and /usr/python/bin with and without 3 suffix
    # Links in /usr/local/bin are needed for tools that expect python to be there
    # Links in /usr/python/bin are needed for tools that are detecting home of python installation including
    # lib/site-packages. The /usr/python/bin should be first in PATH in order to help with the last part.
    for dst in pip3 python3 python3-config; do
        src="$(echo "${dst}" | tr -d 3)"
        echo "Linking ${dst} in /usr/local/bin and /usr/python/bin"
        ln -sv "/usr/python/bin/${dst}" "/usr/local/bin/${dst}"
        for dir in /usr/local/bin /usr/python/bin; do
            if [[ ! -e "${dir}/${src}" ]]; then
                echo "Creating ${src} - > ${dst} link in ${dir}"
                ln -sv "${dir}/${dst}" "${dir}/${src}"
            fi
        done
    done
    for dst in /usr/python/lib/*
    do
        src="/usr/local/lib/$(basename "${dst}")"
        if [[ -e "${src}" ]]; then
            rm -rf "${src}"
        fi
        echo "Linking ${dst} to ${src}"
        ln -sv "${dst}" "${src}"
    done
    ldconfig
}

function install_debian_runtime_dependencies() {
    apt-get update
    apt-get install --no-install-recommends -yqq apt-utils >/dev/null 2>&1
    apt-get install -y --no-install-recommends wget curl gnupg2 lsb-release ca-certificates
    # shellcheck disable=SC2086
    export ${ADDITIONAL_RUNTIME_APT_ENV?}
    if [[ "${RUNTIME_APT_COMMAND}" != "" ]]; then
        bash -o pipefail -o errexit -o nounset -o nolog -c "${RUNTIME_APT_COMMAND}"
    fi
    if [[ "${ADDITIONAL_RUNTIME_APT_COMMAND}" != "" ]]; then
        bash -o pipefail -o errexit -o nounset -o nolog -c "${ADDITIONAL_RUNTIME_APT_COMMAND}"
    fi
    apt-get update
    # shellcheck disable=SC2086
    apt-get install -y --no-install-recommends ${RUNTIME_APT_DEPS} ${ADDITIONAL_RUNTIME_APT_DEPS}
    apt-get autoremove -yqq --purge
    apt-get clean
    link_python
    rm -rf /var/lib/apt/lists/* /var/log/*
}

function install_cosign() {
    local arch
    arch="$(dpkg --print-architecture)"
    declare -A cosign_sha256s=(
        # https://github.com/sigstore/cosign/releases/download/v${COSIGN_VERSION}/cosign_checksums.txt
        [amd64]="db15cc99e6e4837daabab023742aaddc3841ce57f193d11b7c3e06c8003642b2"
        [arm64]="d098f3168ae4b3aa70b4ca78947329b953272b487727d1722cb3cb098a1a20ab"
    )
    local cosign_sha256="${cosign_sha256s[${arch}]}"
    if [[ -z "${cosign_sha256}" ]]; then
        echo "Unsupported architecture for cosign: ${arch}"
        exit 1
    fi
    curl -fsSL \
        "https://github.com/sigstore/cosign/releases/download/v${COSIGN_VERSION}/cosign-linux-${arch}" \
        -o /tmp/cosign
    echo "${cosign_sha256}  /tmp/cosign" | sha256sum --check
    chmod +x /tmp/cosign
}

function install_python() {
    # If system python (3.11 in bookworm) is installed (via automatic installation of some dependencies for example), we need
    # to fail and make sure that it is not there, because there can be strange interactions if we install
    # newer version and system libraries are installed, because
    # when you create a virtualenv part of the shared libraries of Python can be taken from the system
    # Installation leading to weird errors when you want to install some modules - for example when you install ssl:
    # /usr/python/lib/python3.11/lib-dynload/_ssl.cpython-311-aarch64-linux-gnu.so: undefined symbol: _PyModule_Add
    if dpkg -l | grep '^ii' | grep '^ii  libpython' >/dev/null; then
        echo
        echo "ERROR! System python is installed by one of the previous steps"
        echo
        echo "Please make sure that no python packages are installed by default. Displaying the reason why libpython3.11 is installed:"
        echo
        apt-get install -yqq aptitude >/dev/null
        aptitude why libpython3.11
        echo
        exit 1
    else
        echo
        echo "GOOD! System python is not installed - OK"
        echo
    fi
    wget -O python.tar.xz "https://www.python.org/ftp/python/${AIRFLOW_PYTHON_VERSION%%[a-z]*}/Python-${AIRFLOW_PYTHON_VERSION}.tar.xz"
    local major_minor_version
    major_minor_version="${AIRFLOW_PYTHON_VERSION%.*}"
    local major minor
    major="${major_minor_version%.*}"
    minor="${major_minor_version#*.}"
    echo "Verifying Python ${AIRFLOW_PYTHON_VERSION} (${major_minor_version})"
    if [[ "${major}" -gt 3 ]] || [[ "${major}" -eq 3 && "${minor}" -ge 11 ]]; then
        # Sigstore verification for Python >= 3.11 (PEP 761)
        declare -A sigstore_identities=(
            # https://peps.python.org/pep-0664/#release-manager-and-crew
            [3.11]="pablogsal@python.org"
            # https://peps.python.org/pep-0693/#release-manager-and-crew
            [3.12]="thomas@python.org"
            # https://peps.python.org/pep-0719/#release-manager-and-crew
            [3.13]="thomas@python.org"
            # https://peps.python.org/pep-0745/#release-manager-and-crew
            [3.14]="hugo@python.org"
        )
        declare -A sigstore_issuers=(
            [3.11]="https://accounts.google.com"
            [3.12]="https://accounts.google.com"
            [3.13]="https://accounts.google.com"
            [3.14]="https://github.com/login/oauth"
        )
        wget -O python.tar.xz.sigstore \
            "https://www.python.org/ftp/python/${AIRFLOW_PYTHON_VERSION%%[a-z]*}/Python-${AIRFLOW_PYTHON_VERSION}.tar.xz.sigstore"
        install_cosign
        local identity="${sigstore_identities[${major_minor_version}]}"
        local issuer="${sigstore_issuers[${major_minor_version}]}"
        /tmp/cosign verify-blob \
            --bundle python.tar.xz.sigstore \
            --certificate-identity "${identity}" \
            --certificate-oidc-issuer "${issuer}" \
            python.tar.xz
        rm -f python.tar.xz.sigstore /tmp/cosign
    else
        # PGP verification for Python 3.10
        declare -A keys=(
            # gpg: key 64E628F8D684696D: public key "Pablo Galindo Salgado <pablogsal@gmail.com>" imported
            # https://peps.python.org/pep-0619/#release-manager-and-crew
            [3.10]="A035C8C19219BA821ECEA86B64E628F8D684696D"
        )
        wget -O python.tar.xz.asc \
            "https://www.python.org/ftp/python/${AIRFLOW_PYTHON_VERSION%%[a-z]*}/Python-${AIRFLOW_PYTHON_VERSION}.tar.xz.asc"
        GNUPGHOME="$(mktemp -d)"; export GNUPGHOME
        local gpg_key="${keys[${major_minor_version}]}"
        echo "Using GPG key ${gpg_key}"
        gpg --batch --keyserver hkps://keys.openpgp.org --recv-keys "${gpg_key}"
        gpg --batch --verify python.tar.xz.asc python.tar.xz
        gpgconf --kill all
        rm -rf "${GNUPGHOME}" python.tar.xz.asc
    fi
    mkdir -p /usr/src/python
    tar --extract --directory /usr/src/python --strip-components=1 --file python.tar.xz
    rm python.tar.xz
    cd /usr/src/python
    arch="$(dpkg --print-architecture)"; arch="${arch##*-}"
    gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)"
    EXTRA_CFLAGS="$(dpkg-buildflags --get CFLAGS)"
    EXTRA_CFLAGS="${EXTRA_CFLAGS:-} -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer";
    LDFLAGS="$(dpkg-buildflags --get LDFLAGS)"
    LDFLAGS="${LDFLAGS:--Wl},--strip-all"
    # Link-Time Optimization (LTO) uses MD5 checksums for object file verification during
    # compilation. In FIPS mode, MD5 is blocked as a non-approved algorithm, causing builds
    # to fail. The PYTHON_LTO variable allows disabling LTO for FIPS-compliant builds.
    # See: https://github.com/apache/airflow/issues/58337
    local lto_option=""
    if [[ "${PYTHON_LTO:-true}" == "true" ]]; then
        lto_option="--with-lto"
    fi
    local build_log
    build_log=$(mktemp)
    echo "Building Python ${AIRFLOW_PYTHON_VERSION} from source..."
    if ! (
        ./configure --enable-optimizations --prefix=/usr/python/ --with-ensurepip --build="$gnuArch" \
            --enable-loadable-sqlite-extensions --enable-option-checking=fatal \
                --enable-shared ${lto_option} && \
        make -s -j "$(nproc)" "EXTRA_CFLAGS=${EXTRA_CFLAGS:-}" \
            "LDFLAGS=${LDFLAGS:--Wl},-rpath='\$\$ORIGIN/../lib'" python && \
        make -s -j "$(nproc)" install
    ) > "${build_log}" 2>&1; then
        echo
        echo "ERROR! Python build failed. Build output:"
        echo
        cat "${build_log}"
        rm -f "${build_log}"
        exit 1
    fi
    rm -f "${build_log}"
    cd /
    rm -rf /usr/src/python
    find /usr/python -depth \
      \( \
        \( -type d -a \( -name test -o -name tests -o -name idle_test \) \) \
        -o \( -type f -a \( -name 'libpython*.a' \) \) \
    \) -exec rm -rf '{}' +
    link_python
}

function install_golang() {
    curl "https://dl.google.com/go/go${GOLANG_MAJOR_MINOR_VERSION}.linux-$(dpkg --print-architecture).tar.gz" -o "go${GOLANG_MAJOR_MINOR_VERSION}.linux.tar.gz"
    rm -rf /usr/local/go && tar -C /usr/local -xzf go"${GOLANG_MAJOR_MINOR_VERSION}".linux.tar.gz
}

function apt_clean() {
    apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false
    rm -rf /var/lib/apt/lists/* /var/log/*
}

if [[ "${INSTALLATION_TYPE}" == "RUNTIME" ]]; then
    get_runtime_apt_deps
    install_debian_runtime_dependencies
    install_docker_cli
    apt_clean
else
    get_dev_apt_deps
    install_debian_dev_dependencies
    install_python
    install_additional_dev_dependencies
    if [[ "${INSTALLATION_TYPE}" == "CI" ]]; then
        install_golang
    fi
    install_docker_cli
    apt_clean
fi
EOF

# The content below is automatically copied from scripts/docker/install_mysql.sh
COPY <<"EOF" /install_mysql.sh
#!/usr/bin/env bash
. "$( dirname "${BASH_SOURCE[0]}" )/common.sh"

set -euo pipefail

common::get_colors
declare -a packages

readonly MARIADB_LTS_VERSION="10.11"

: "${INSTALL_MYSQL_CLIENT:?Should be true or false}"
: "${INSTALL_MYSQL_CLIENT_TYPE:-mariadb}"

if [[ "${INSTALL_MYSQL_CLIENT}" != "true" && "${INSTALL_MYSQL_CLIENT}" != "false" ]]; then
    echo
    echo "${COLOR_RED}INSTALL_MYSQL_CLIENT must be either true or false${COLOR_RESET}"
    echo
    exit 1
fi

if [[ "${INSTALL_MYSQL_CLIENT_TYPE}" != "mysql" && "${INSTALL_MYSQL_CLIENT_TYPE}" != "mariadb" ]]; then
    echo
    echo "${COLOR_RED}INSTALL_MYSQL_CLIENT_TYPE must be either mysql or mariadb${COLOR_RESET}"
    echo
    exit 1
fi

if [[ "${INSTALL_MYSQL_CLIENT_TYPE}" == "mysql" ]]; then
    echo
    echo "${COLOR_RED}The 'mysql' client type is not supported any more. Use 'mariadb' instead.${COLOR_RESET}"
    echo
    echo "The MySQL drivers are wrongly packaged and released by Oracle with an expiration date on their GPG keys,"
    echo "which causes builds to fail after the expiration date. MariaDB client is protocol-compatible with MySQL client."
    echo ""
    echo "Every two years the MySQL packages fail and Oracle team is always surprised and struggling"
    echo "with fixes and re-signing the packages which lasts few days"
    echo "See https://bugs.mysql.com/bug.php?id=113432 for more details."
    echo "As a community we are not able to support this broken packaging practice from Oracle"
    echo "Feel free however to install MySQL drivers on your own as extension of the image."
    echo
    exit 1
fi

retry() {
    local retries=3
    local count=0
    # adding delay of 10 seconds
    local delay=10
    until "$@"; do
        exit_code=$?
        count=$((count + 1))
        if [[ $count -lt $retries ]]; then
            echo "Command failed. Attempt $count/$retries. Retrying in ${delay}s..."
            sleep $delay
        else
            echo "Command failed after $retries attempts."
            return $exit_code
        fi
    done
}

install_mariadb_client() {
    # List of compatible package Oracle MySQL -> MariaDB:
    # `mysql-client` -> `mariadb-client` or `mariadb-client-compat` (11+)
    # `libmysqlclientXX` (where XX is a number) -> `libmariadb3-compat`
    # `libmysqlclient-dev` -> `libmariadb-dev-compat`
    #
    # Different naming against Debian repo which we used before
    # that some of packages might contains `-compat` suffix, Debian repo -> MariaDB repo:
    # `libmariadb-dev` -> `libmariadb-dev-compat`
    # `mariadb-client-core` -> `mariadb-client` or `mariadb-client-compat` (11+)
    if [[ "${1}" == "dev" ]]; then
        packages=("libmariadb-dev-compat" "mariadb-client")
    elif [[ "${1}" == "prod" ]]; then
        packages=("libmariadb3-compat" "mariadb-client")
    else
        echo
        echo "${COLOR_RED}Specify either prod or dev${COLOR_RESET}"
        echo
        exit 1
    fi

    common::import_trusted_gpg "0xF1656F24C74CD1D8" "mariadb"

    echo
    echo "${COLOR_BLUE}Installing MariaDB client version ${MARIADB_LTS_VERSION}: ${1}${COLOR_RESET}"
    echo "${COLOR_YELLOW}MariaDB client protocol-compatible with MySQL client.${COLOR_RESET}"
    echo

    echo "deb [arch=amd64,arm64] https://archive.mariadb.org/mariadb-${MARIADB_LTS_VERSION}/repo/debian/ $(lsb_release -cs) main" > \
        /etc/apt/sources.list.d/mariadb.list
    # Make sure that dependencies from MariaDB repo are preferred over Debian dependencies
    printf "Package: *\nPin: release o=MariaDB\nPin-Priority: 999\n" > /etc/apt/preferences.d/mariadb
    retry apt-get update
    retry apt-get install --no-install-recommends -y "${packages[@]}"
    apt-get autoremove -yqq --purge
    apt-get clean && rm -rf /var/lib/apt/lists/*
}

if [[ ${INSTALL_MYSQL_CLIENT:="true"} == "true" ]]; then
    install_mariadb_client "${@}"
fi
EOF

# The content below is automatically copied from scripts/docker/install_mssql.sh
COPY <<"EOF" /install_mssql.sh
#!/usr/bin/env bash
. "$( dirname "${BASH_SOURCE[0]}" )/common.sh"

set -euo pipefail

common::get_colors
declare -a packages

: "${INSTALL_MSSQL_CLIENT:?Should be true or false}"


function install_mssql_client() {
    # Install MsSQL client from Microsoft repositories
    if [[ ${INSTALL_MSSQL_CLIENT:="true"} != "true" ]]; then
        echo
        echo "${COLOR_BLUE}Skip installing mssql client${COLOR_RESET}"
        echo
        return
    fi
    packages=("msodbcsql18")

    common::import_trusted_gpg "EB3E94ADBE1229CF" "microsoft"

    echo
    echo "${COLOR_BLUE}Installing mssql client${COLOR_RESET}"
    echo

    echo "deb [arch=amd64,arm64] https://packages.microsoft.com/debian/$(lsb_release -rs)/prod $(lsb_release -cs) main" > \
        /etc/apt/sources.list.d/mssql-release.list &&
    mkdir -p /opt/microsoft/msodbcsql18 &&
    touch /opt/microsoft/msodbcsql18/ACCEPT_EULA &&
    apt-get update -yqq &&
    apt-get upgrade -yqq &&
    apt-get -yqq install --no-install-recommends "${packages[@]}" &&
    apt-get autoremove -yqq --purge &&
    apt-get clean &&
    rm -rf /var/lib/apt/lists/*
}

install_mssql_client "${@}"
EOF

# The content below is automatically copied from scripts/docker/install_postgres.sh
COPY <<"EOF" /install_postgres.sh
#!/usr/bin/env bash
. "$( dirname "${BASH_SOURCE[0]}" )/common.sh"
set -euo pipefail

common::get_colors
declare -a packages

: "${INSTALL_POSTGRES_CLIENT:?Should be true or false}"

install_postgres_client() {
    echo
    echo "${COLOR_BLUE}Installing postgres client${COLOR_RESET}"
    echo

    if [[ "${1}" == "dev" ]]; then
        packages=("libpq-dev" "postgresql-client")
    elif [[ "${1}" == "prod" ]]; then
        packages=("postgresql-client")
    else
        echo
        echo "Specify either prod or dev"
        echo
        exit 1
    fi

    common::import_trusted_gpg "7FCC7D46ACCC4CF8" "postgres"

    echo "deb [arch=amd64,arm64] https://apt.postgresql.org/pub/repos/apt/ $(lsb_release -cs)-pgdg main" > \
        /etc/apt/sources.list.d/pgdg.list
    apt-get update
    apt-get install --no-install-recommends -y "${packages[@]}"
    apt-get autoremove -yqq --purge
    apt-get clean && rm -rf /var/lib/apt/lists/*
}

if [[ ${INSTALL_POSTGRES_CLIENT:="true"} == "true" ]]; then
    install_postgres_client "${@}"
fi
EOF

# The content below is automatically copied from scripts/docker/install_packaging_tools.sh
COPY <<"EOF" /install_packaging_tools.sh
#!/usr/bin/env bash
. "$( dirname "${BASH_SOURCE[0]}" )/common.sh"

common::get_colors
common::get_packaging_tool
common::show_packaging_tool_version_and_location
common::install_packaging_tools
EOF

# The content below is automatically copied from scripts/docker/common.sh
COPY <<"EOF" /common.sh
#!/usr/bin/env bash
set -euo pipefail

function common::get_colors() {
    COLOR_BLUE=$'\e[34m'
    COLOR_GREEN=$'\e[32m'
    COLOR_RED=$'\e[31m'
    COLOR_RESET=$'\e[0m'
    COLOR_YELLOW=$'\e[33m'
    export COLOR_BLUE
    export COLOR_GREEN
    export COLOR_RED
    export COLOR_RESET
    export COLOR_YELLOW
}

function common::get_packaging_tool() {
    : "${AIRFLOW_USE_UV:?Should be set}"

    ## IMPORTANT: IF YOU MODIFY THIS FUNCTION YOU SHOULD ALSO MODIFY CORRESPONDING FUNCTION IN
    ## `scripts/in_container/_in_container_utils.sh`
    if [[ ${AIRFLOW_USE_UV} == "true" ]]; then
        echo
        echo "${COLOR_BLUE}Using 'uv' to install Airflow${COLOR_RESET}"
        echo
        export PACKAGING_TOOL="uv"
        export PACKAGING_TOOL_CMD="uv pip"
        # --no-binary  is needed in order to avoid libxml and xmlsec using different version of libxml2
         # (binary lxml embeds its own libxml2, while xmlsec uses system one).
         # See https://bugs.launchpad.net/lxml/+bug/2110068
         if [[ ${AIRFLOW_INSTALLATION_METHOD=} == "." && -f "./pyproject.toml" ]]; then
            # for uv only install dev group when we install from sources
            export EXTRA_INSTALL_FLAGS="--group=dev --no-binary lxml --no-binary xmlsec"
        else
            export EXTRA_INSTALL_FLAGS="--no-binary lxml --no-binary xmlsec"
        fi
        export EXTRA_UNINSTALL_FLAGS=""
        export UPGRADE_TO_HIGHEST_RESOLUTION="--upgrade --resolution highest"
        export UPGRADE_IF_NEEDED="--upgrade"
        UV_CONCURRENT_DOWNLOADS=$(nproc --all)
        export UV_CONCURRENT_DOWNLOADS
        if [[ ${INCLUDE_PRE_RELEASE=} == "true" ]]; then
            EXTRA_INSTALL_FLAGS="${EXTRA_INSTALL_FLAGS} --prerelease if-necessary"
        fi
    else
        echo
        echo "${COLOR_BLUE}Using 'pip' to install Airflow${COLOR_RESET}"
        echo
        export PACKAGING_TOOL="pip"
        export PACKAGING_TOOL_CMD="pip"
        # --no-binary  is needed in order to avoid libxml and xmlsec using different version of libxml2
        # (binary lxml embeds its own libxml2, while xmlsec uses system one).
        # See https://bugs.launchpad.net/lxml/+bug/2110068
        export EXTRA_INSTALL_FLAGS="--root-user-action ignore --no-binary lxml,xmlsec"
        export EXTRA_UNINSTALL_FLAGS="--yes"
        export UPGRADE_TO_HIGHEST_RESOLUTION="--upgrade --upgrade-strategy eager"
        export UPGRADE_IF_NEEDED="--upgrade --upgrade-strategy only-if-needed"
        if [[ ${INCLUDE_PRE_RELEASE=} == "true" ]]; then
            EXTRA_INSTALL_FLAGS="${EXTRA_INSTALL_FLAGS} --pre"
        fi
    fi
}

function common::get_airflow_version_specification() {
    if [[ -z ${AIRFLOW_VERSION_SPECIFICATION=}
        && -n ${AIRFLOW_VERSION}
        && ${AIRFLOW_INSTALLATION_METHOD} != "." ]]; then
        AIRFLOW_VERSION_SPECIFICATION="==${AIRFLOW_VERSION}"
    fi
}

function common::get_constraints_location() {
    # When installing from sources without upgrade, generate constraints from uv.lock
    if [[ ${AIRFLOW_INSTALLATION_METHOD=} == "." && -z "${UPGRADE_RANDOM_INDICATOR_STRING=}" ]]; then
        echo
        echo "${COLOR_BLUE}Installing from sources with uv.lock - generating constraints from uv.lock${COLOR_RESET}"
        echo
        uv export --frozen --no-hashes --no-emit-project --no-editable --no-header \
            --no-annotate > "${HOME}/constraints.txt" 2>/dev/null || true
        return
    fi

    # auto-detect Airflow-constraint reference and location
    if [[ -z "${AIRFLOW_CONSTRAINTS_REFERENCE=}" ]]; then
        if  [[ ${AIRFLOW_VERSION} =~ v?2.* || ${AIRFLOW_VERSION} =~ v?3.* ]]; then
            AIRFLOW_CONSTRAINTS_REFERENCE=constraints-${AIRFLOW_VERSION}
        else
            AIRFLOW_CONSTRAINTS_REFERENCE=${DEFAULT_CONSTRAINTS_BRANCH}
        fi
    fi

    if [[ -z ${AIRFLOW_CONSTRAINTS_LOCATION=} ]]; then
        local constraints_base="https://raw.githubusercontent.com/${CONSTRAINTS_GITHUB_REPOSITORY}/${AIRFLOW_CONSTRAINTS_REFERENCE}"
        local python_version
        python_version=$(python -c 'import sys; print(f"{sys.version_info.major}.{sys.version_info.minor}")')
        AIRFLOW_CONSTRAINTS_LOCATION="${constraints_base}/${AIRFLOW_CONSTRAINTS_MODE}-${python_version}.txt"
    fi

    if [[ ${AIRFLOW_CONSTRAINTS_LOCATION} =~ http.* ]]; then
        echo
        echo "${COLOR_BLUE}Downloading constraints from ${AIRFLOW_CONSTRAINTS_LOCATION} to ${HOME}/constraints.txt ${COLOR_RESET}"
        echo
        if ! curl -sSf -o "${HOME}/constraints.txt" "${AIRFLOW_CONSTRAINTS_LOCATION}"; then
            echo
            echo "${COLOR_YELLOW}Constraints file not found at ${AIRFLOW_CONSTRAINTS_LOCATION} (new Python version being bootstrapped?).${COLOR_RESET}"
            echo "${COLOR_YELLOW}Falling back to no-constraints installation.${COLOR_RESET}"
            echo
            AIRFLOW_CONSTRAINTS_LOCATION=""
            # Create an empty constraints file so --constraint flag still works
            touch "${HOME}/constraints.txt"
        fi
    else
        echo
        echo "${COLOR_BLUE}Copying constraints from ${AIRFLOW_CONSTRAINTS_LOCATION} to ${HOME}/constraints.txt ${COLOR_RESET}"
        echo
        cp "${AIRFLOW_CONSTRAINTS_LOCATION}" "${HOME}/constraints.txt"
    fi
}

function common::show_packaging_tool_version_and_location() {
   echo "PATH=${PATH}"
   echo "Installed pip: $(pip --version): $(which pip)"
   if [[ ${PACKAGING_TOOL} == "pip" ]]; then
       echo "${COLOR_BLUE}Using 'pip' to install Airflow${COLOR_RESET}"
   else
       echo "${COLOR_BLUE}Using 'uv' to install Airflow${COLOR_RESET}"
       echo "Installed uv: $(uv --version 2>/dev/null || echo "Not installed yet"): $(which uv 2>/dev/null)"
   fi
}

function common::install_packaging_tools() {
    : "${AIRFLOW_USE_UV:?Should be set}"
    if [[ "${VIRTUAL_ENV=}" != "" ]]; then
        echo
        echo "${COLOR_BLUE}Checking packaging tools in venv: ${VIRTUAL_ENV}${COLOR_RESET}"
        echo
    else
        echo
        echo "${COLOR_BLUE}Checking packaging tools for system Python installation: $(which python)${COLOR_RESET}"
        echo
    fi
    if [[ ${AIRFLOW_PIP_VERSION=} == "" ]]; then
        echo
        echo "${COLOR_BLUE}Installing latest pip version${COLOR_RESET}"
        echo
        pip install --root-user-action ignore --disable-pip-version-check --upgrade pip
    elif [[ ! ${AIRFLOW_PIP_VERSION} =~ ^[0-9].* ]]; then
        echo
        echo "${COLOR_BLUE}Installing pip version from spec ${AIRFLOW_PIP_VERSION}${COLOR_RESET}"
        echo
        # shellcheck disable=SC2086
        pip install --root-user-action ignore --disable-pip-version-check "pip @ ${AIRFLOW_PIP_VERSION}"
    else
        local installed_pip_version
        installed_pip_version=$(python -c 'from importlib.metadata import version; print(version("pip"))')
        if [[ ${installed_pip_version} != "${AIRFLOW_PIP_VERSION}" ]]; then
            echo
            echo "${COLOR_BLUE}(Re)Installing pip version: ${AIRFLOW_PIP_VERSION}${COLOR_RESET}"
            echo
            pip install --root-user-action ignore --disable-pip-version-check "pip==${AIRFLOW_PIP_VERSION}"
        fi
    fi
    if [[ ${AIRFLOW_UV_VERSION=} == "" ]]; then
        echo
        echo "${COLOR_BLUE}Installing latest uv version${COLOR_RESET}"
        echo
        pip install --root-user-action ignore --disable-pip-version-check --upgrade uv
    elif [[ ! ${AIRFLOW_UV_VERSION} =~ ^[0-9].* ]]; then
        echo
        echo "${COLOR_BLUE}Installing uv version from spec ${AIRFLOW_UV_VERSION}${COLOR_RESET}"
        echo
        # shellcheck disable=SC2086
        pip install --root-user-action ignore --disable-pip-version-check "uv @ ${AIRFLOW_UV_VERSION}"
    else
        local installed_uv_version
        installed_uv_version=$(python -c 'from importlib.metadata import version; print(version("uv"))' 2>/dev/null || echo "Not installed yet")
        if [[ ${installed_uv_version} != "${AIRFLOW_UV_VERSION}" ]]; then
            echo
            echo "${COLOR_BLUE}(Re)Installing uv version: ${AIRFLOW_UV_VERSION}${COLOR_RESET}"
            echo
            # shellcheck disable=SC2086
            pip install --root-user-action ignore --disable-pip-version-check "uv==${AIRFLOW_UV_VERSION}"
        fi
    fi
    if  [[ ${AIRFLOW_PREK_VERSION=} == "" ]]; then
        echo
        echo "${COLOR_BLUE}Installing latest prek, uv${COLOR_RESET}"
        echo
        uv tool install prek --with uv
        # make sure that the venv/user in .local exists
        mkdir -p "${HOME}/.local/bin"
    else
        echo
        echo "${COLOR_BLUE}Installing predefined versions of prek, uv:${COLOR_RESET}"
        echo "${COLOR_BLUE}prek(${AIRFLOW_PREK_VERSION}) uv(${AIRFLOW_UV_VERSION})${COLOR_RESET}"
        echo
        uv tool install "prek==${AIRFLOW_PREK_VERSION}" --with "uv==${AIRFLOW_UV_VERSION}"
        # make sure that the venv/user in .local exists
        mkdir -p "${HOME}/.local/bin"
    fi
}

function common::import_trusted_gpg() {
    common::get_colors

    local key=${1:?${COLOR_RED}First argument expects OpenPGP Key ID${COLOR_RESET}}
    local name=${2:?${COLOR_RED}Second argument expected trust storage name${COLOR_RESET}}
    # Please note that not all servers could be used for retrieve keys
    #  sks-keyservers.net: Unmaintained and DNS taken down due to GDPR requests.
    #  keys.openpgp.org: User ID Mandatory, not suitable for APT repositories
    #  keyring.debian.org: Only accept keys in Debian keyring.
    #  pgp.mit.edu: High response time.
    local keyservers=(
        "hkps://keyserver.ubuntu.com"
        "hkps://pgp.surf.nl"
    )

    GNUPGHOME="$(mktemp -d)"
    export GNUPGHOME
    set +e
    for keyserver in $(shuf -e "${keyservers[@]}"); do
        echo "${COLOR_BLUE}Try to receive GPG public key ${key} from ${keyserver}${COLOR_RESET}"
        gpg --keyserver "${keyserver}" --recv-keys "${key}" 2>&1 && break
        echo "${COLOR_YELLOW}Unable to receive GPG public key ${key} from ${keyserver}${COLOR_RESET}"
    done
    set -e
    gpg --export "${key}" > "/etc/apt/trusted.gpg.d/${name}.gpg"
    gpgconf --kill all
    rm -rf "${GNUPGHOME}"
    unset GNUPGHOME
}
EOF

# The content below is automatically copied from scripts/docker/install_airflow_when_building_images.sh
COPY <<"EOF" /install_airflow_when_building_images.sh
#!/usr/bin/env bash

. "$( dirname "${BASH_SOURCE[0]}" )/common.sh"

function install_from_sources() {
    local extra_sync_flags
    extra_sync_flags=""
    if [[ ${VIRTUAL_ENV=} != "" ]]; then
        extra_sync_flags="--active"
    fi
    if [[ "${UPGRADE_RANDOM_INDICATOR_STRING=}" != "" ]]; then
        if [[ ${PACKAGING_TOOL_CMD} == "pip" ]]; then
            set +x
            echo
            echo "${COLOR_RED}We only support uv not pip installation for upgrading dependencies!.${COLOR_RESET}"
            echo
            exit 1
        fi
        set +x
        echo
        echo "${COLOR_BLUE}Attempting to upgrade all packages to highest versions.${COLOR_RESET}"
        echo
        # --no-binary  is needed in order to avoid libxml and xmlsec using different version of libxml2
        # (binary lxml embeds its own libxml2, while xmlsec uses system one).
        # See https://bugs.launchpad.net/lxml/+bug/2110068
        set -x
        uv sync --all-packages --resolution highest --group dev --group docs --group docs-gen \
            --group leveldb ${extra_sync_flags} --no-binary-package lxml --no-binary-package xmlsec \
            --no-python-downloads --no-managed-python
    else
        set +x
        echo
        echo "${COLOR_BLUE}Installing all packages from uv.lock (frozen).${COLOR_RESET}"
        echo
        # Use uv sync --frozen to install exactly what is pinned in uv.lock without re-resolving.
        # --no-binary-package is needed in order to avoid libxml and xmlsec using different version of
        # libxml2 (binary lxml embeds its own libxml2, while xmlsec uses system one).
        # See https://bugs.launchpad.net/lxml/+bug/2110068
        set -x
        if ! uv sync --all-packages --frozen --group dev --group docs --group docs-gen \
            --group leveldb ${extra_sync_flags} --no-binary-package lxml --no-binary-package xmlsec \
            --no-python-downloads --no-managed-python; then
            set +x
            if [[ ${AIRFLOW_FALLBACK_NO_CONSTRAINTS_INSTALLATION} != "true" ]]; then
                echo
                echo "${COLOR_RED}Failing because frozen uv.lock installation failed and fallback is disabled.${COLOR_RESET}"
                echo
                exit 1
            fi
            echo
            echo "${COLOR_YELLOW}Likely pyproject.toml has new dependencies not reflected in uv.lock.${COLOR_RESET}"
            echo
            echo "${COLOR_BLUE}Falling back to re-resolving dependencies (uv sync without --frozen).${COLOR_RESET}"
            echo
            set -x
            uv sync --all-packages --group dev --group docs --group docs-gen \
                --group leveldb ${extra_sync_flags} --no-binary-package lxml --no-binary-package xmlsec \
                --no-python-downloads --no-managed-python
            set +x
        fi
    fi
}

function install_from_external_spec() {
     local installation_command_flags
    if [[ ${AIRFLOW_INSTALLATION_METHOD} == "apache-airflow" ]]; then
        installation_command_flags="apache-airflow[${AIRFLOW_EXTRAS}]${AIRFLOW_VERSION_SPECIFICATION}"
    else
        echo
        echo "${COLOR_RED}The '${AIRFLOW_INSTALLATION_METHOD}' installation method is not supported${COLOR_RESET}"
        echo
        echo "${COLOR_YELLOW}Supported methods are ('.', 'apache-airflow')${COLOR_RESET}"
        echo
        exit 1
    fi
    if [[ "${UPGRADE_RANDOM_INDICATOR_STRING=}" != "" ]]; then
        echo
        echo "${COLOR_BLUE}Remove airflow and all provider distributions installed before potentially${COLOR_RESET}"
        echo
        set -x
        ${PACKAGING_TOOL_CMD} freeze | grep apache-airflow | xargs ${PACKAGING_TOOL_CMD} uninstall ${EXTRA_UNINSTALL_FLAGS} 2>/dev/null || true
        set +x
        echo
        echo "${COLOR_BLUE}Installing all packages with highest resolutions. Installation method: ${AIRFLOW_INSTALLATION_METHOD}${COLOR_RESET}"
        echo
        set -x
        ${PACKAGING_TOOL_CMD} install ${EXTRA_INSTALL_FLAGS} ${UPGRADE_TO_HIGHEST_RESOLUTION} ${ADDITIONAL_PIP_INSTALL_FLAGS} ${installation_command_flags}
        set +x
    else
        echo
        echo "${COLOR_BLUE}Installing all packages with constraints. Installation method: ${AIRFLOW_INSTALLATION_METHOD}${COLOR_RESET}"
        echo
        set -x
        if ! ${PACKAGING_TOOL_CMD} install ${EXTRA_INSTALL_FLAGS} ${ADDITIONAL_PIP_INSTALL_FLAGS} ${installation_command_flags} --constraint "${HOME}/constraints.txt"; then
            set +x
            if [[ ${AIRFLOW_FALLBACK_NO_CONSTRAINTS_INSTALLATION} != "true" ]]; then
                echo
                echo "${COLOR_RED}Failing because constraints installation failed and fallback is disabled.${COLOR_RESET}"
                echo
                exit 1
            fi
            echo
            echo "${COLOR_YELLOW}Likely pyproject.toml has new dependencies conflicting with constraints.${COLOR_RESET}"
            echo
            echo "${COLOR_BLUE}Falling back to no-constraints installation.${COLOR_RESET}"
            echo
            set -x
            ${PACKAGING_TOOL_CMD} install ${EXTRA_INSTALL_FLAGS} ${UPGRADE_IF_NEEDED} ${ADDITIONAL_PIP_INSTALL_FLAGS} ${installation_command_flags}
            set +x
        fi
    fi
}


function install_airflow_when_building_images() {
    # Remove mysql from extras if client is not going to be installed
    if [[ ${INSTALL_MYSQL_CLIENT} != "true" ]]; then
        AIRFLOW_EXTRAS=${AIRFLOW_EXTRAS/mysql,}
        echo "${COLOR_YELLOW}MYSQL client installation is disabled. Extra 'mysql' installations were therefore omitted.${COLOR_RESET}"
    fi
    # Remove postgres from extras if client is not going to be installed
    if [[ ${INSTALL_POSTGRES_CLIENT} != "true" ]]; then
        AIRFLOW_EXTRAS=${AIRFLOW_EXTRAS/postgres,}
        echo "${COLOR_YELLOW}Postgres client installation is disabled. Extra 'postgres' installations were therefore omitted.${COLOR_RESET}"
    fi
    # Determine the installation_command_flags based on AIRFLOW_INSTALLATION_METHOD method
    if [[ ${AIRFLOW_INSTALLATION_METHOD} == "." ]]; then
        install_from_sources
    else
        install_from_external_spec
    fi
    set +x
    common::install_packaging_tools
    echo
    echo "${COLOR_BLUE}Running 'pip check'${COLOR_RESET}"
    echo
    # We use pip check here to make sure that whatever `uv` installs, is also "correct" according to `pip`
    pip check
}

common::get_colors
common::get_packaging_tool
common::get_airflow_version_specification
common::get_constraints_location
common::show_packaging_tool_version_and_location

install_airflow_when_building_images
EOF

# The content below is automatically copied from scripts/docker/install_additional_dependencies.sh
COPY <<"EOF" /install_additional_dependencies.sh
#!/usr/bin/env bash
set -euo pipefail

: "${ADDITIONAL_PYTHON_DEPS:?Should be set}"

. "$( dirname "${BASH_SOURCE[0]}" )/common.sh"

function install_additional_dependencies() {
    if [[ "${UPGRADE_RANDOM_INDICATOR_STRING=}" != "" ]]; then
        echo
        echo "${COLOR_BLUE}Installing additional dependencies while upgrading to newer dependencies${COLOR_RESET}"
        echo
        set -x
        ${PACKAGING_TOOL_CMD} install ${EXTRA_INSTALL_FLAGS} ${UPGRADE_TO_HIGHEST_RESOLUTION} \
            ${ADDITIONAL_PIP_INSTALL_FLAGS} \
            ${ADDITIONAL_PYTHON_DEPS}
        set +x
        common::install_packaging_tools
        echo
        echo "${COLOR_BLUE}Running 'pip check'${COLOR_RESET}"
        echo
        # We use pip check here to make sure that whatever `uv` installs, is also "correct" according to `pip`
        pip check
    else
        echo
        echo "${COLOR_BLUE}Installing additional dependencies upgrading only if needed${COLOR_RESET}"
        echo
        set -x
        ${PACKAGING_TOOL_CMD} install ${EXTRA_INSTALL_FLAGS} ${UPGRADE_IF_NEEDED} \
            ${ADDITIONAL_PIP_INSTALL_FLAGS} \
            ${ADDITIONAL_PYTHON_DEPS}
        set +x
        common::install_packaging_tools
        echo
        echo "${COLOR_BLUE}Running 'pip check'${COLOR_RESET}"
        echo
        # We use pip check here to make sure that whatever `uv` installs, is also "correct" according to `pip`
        pip check
    fi
}

common::get_colors
common::get_packaging_tool
common::get_airflow_version_specification
common::get_constraints_location
common::show_packaging_tool_version_and_location

install_additional_dependencies
EOF

# The content below is automatically copied from scripts/docker/entrypoint_ci.sh
COPY <<"EOF" /entrypoint_ci.sh
#!/usr/bin/env bash
function set_verbose() {
    if [[ ${VERBOSE_COMMANDS:="false"} == "true" ]]; then
        set -x
    else
        set +x
    fi
}

set_verbose
. "${AIRFLOW_SOURCES:-/opt/airflow}"/scripts/in_container/_in_container_script_init.sh

LD_PRELOAD="/usr/lib/$(uname -m)-linux-gnu/libstdc++.so.6"
export LD_PRELOAD

chmod 1777 /tmp

AIRFLOW_SOURCES=$(cd "${IN_CONTAINER_DIR}/../.." || exit 1; pwd)

PYTHON_MAJOR_MINOR_VERSION=${PYTHON_MAJOR_MINOR_VERSION:=3.10}

export AIRFLOW_HOME=${AIRFLOW_HOME:=${HOME}}

mkdir "${AIRFLOW_HOME}/sqlite" -p || true

ASSET_COMPILATION_WAIT_MULTIPLIER=${ASSET_COMPILATION_WAIT_MULTIPLIER:=1}

if [[ "${CI=}" == "true" ]]; then
    export COLUMNS="202"
fi

. "${IN_CONTAINER_DIR}/check_connectivity.sh"

function wait_for_asset_compilation() {
    if [[ -f "${AIRFLOW_SOURCES}/.build/ui/.asset_compile.lock" ]]; then
        echo
        echo "${COLOR_YELLOW}Waiting for asset compilation to complete in the background.${COLOR_RESET}"
        echo
        local counter=0
        while [[ -f "${AIRFLOW_SOURCES}/.build/ui/.asset_compile.lock" ]]; do
            if (( counter % 5 == 2 )); then
                echo "${COLOR_BLUE}Still waiting .....${COLOR_RESET}"
            fi
            sleep 1
            ((counter=counter+1))
            if [[ ${counter} == 30*$ASSET_COMPILATION_WAIT_MULTIPLIER ]]; then
                echo
                echo "${COLOR_YELLOW}The asset compilation is taking too long.${COLOR_YELLOW}"
                echo """
If it does not complete soon, you might want to stop it and remove file lock:
   * press Ctrl-C
   * run 'rm ${AIRFLOW_SOURCES}/.build/ui/.asset_compile.lock'
"""
            fi
            if [[ ${counter} == 60*$ASSET_COMPILATION_WAIT_MULTIPLIER ]]; then
                echo
                echo "${COLOR_RED}The asset compilation is taking too long. Exiting.${COLOR_RED}"
                echo "${COLOR_RED}refer to dev/breeze/doc/04_troubleshooting.rst for resolution steps.${COLOR_RED}"
                echo
                exit 1
            fi
        done
    fi
    if [ -f "${AIRFLOW_SOURCES}/.build/ui/asset_compile.out" ]; then
        echo
        echo "${COLOR_RED}The asset compilation failed. Exiting.${COLOR_RESET}"
        echo
        cat "${AIRFLOW_SOURCES}/.build/ui/asset_compile.out"
        rm "${AIRFLOW_SOURCES}/.build/ui/asset_compile.out"
        echo
        exit 1
    fi
}

function environment_initialization() {
    if [[ ${SKIP_ENVIRONMENT_INITIALIZATION=} == "true" ]]; then
        return
    fi
    echo
    echo "${COLOR_BLUE}Running Initialization. Your basic configuration is:${COLOR_RESET}"
    echo
    echo "  * ${COLOR_BLUE}Airflow home:${COLOR_RESET} ${AIRFLOW_HOME}"
    echo "  * ${COLOR_BLUE}Airflow sources:${COLOR_RESET} ${AIRFLOW_SOURCES}"
    echo "  * ${COLOR_BLUE}Airflow core SQL connection:${COLOR_RESET} ${AIRFLOW__DATABASE__SQL_ALCHEMY_CONN:=}"
    if [[ ${BACKEND=} == "postgres" ]]; then
        echo "  * ${COLOR_BLUE}Airflow backend:${COLOR_RESET} Postgres: ${POSTGRES_VERSION}"
    elif [[ ${BACKEND=} == "mysql" ]]; then
        echo "  * ${COLOR_BLUE}Airflow backend:${COLOR_RESET} MySQL: ${MYSQL_VERSION}"
    elif [[ ${BACKEND=} == "sqlite" ]]; then
        echo "  * ${COLOR_BLUE}Airflow backend:${COLOR_RESET} Sqlite"
    elif [[ ${BACKEND=} == "custom" ]]; then
        local _conn_url="${AIRFLOW__DATABASE__SQL_ALCHEMY_CONN:-}"
        local _masked_url
        _masked_url=$(echo "${_conn_url}" | sed -E 's|://([^:]+):([^@]+)@|://\1:***@|')
        echo "  * ${COLOR_BLUE}Airflow backend:${COLOR_RESET} Custom (${_masked_url})"
    fi
    echo

    if [[ ${STANDALONE_DAG_PROCESSOR=} == "true" ]]; then
        echo
        echo "${COLOR_BLUE}Forcing scheduler/standalone_dag_processor to True${COLOR_RESET}"
        echo
        export AIRFLOW__SCHEDULER__STANDALONE_DAG_PROCESSOR=True
    fi

    if [[ ${GO_WORKER=} == "true" ]]; then
        echo
        echo "${COLOR_BLUE}Starting go worker${COLOR_RESET}"
        echo
        export AIRFLOW__SCHEDULER__GO_WORKER=True
    fi

    RUN_TESTS=${RUN_TESTS:="false"}
    CI=${CI:="false"}

    # Added to have run-tests on path
    export PATH=${PATH}:${AIRFLOW_SOURCES}:/usr/local/go/bin/

    mkdir -pv "${AIRFLOW_HOME}/logs/"

    # Change the default worker_concurrency for tests
    export AIRFLOW__CELERY__WORKER_CONCURRENCY=8

    set +e

    # shellcheck source=scripts/in_container/configure_environment.sh
    . "${IN_CONTAINER_DIR}/configure_environment.sh"
    # shellcheck source=scripts/in_container/run_init_script.sh
    . "${IN_CONTAINER_DIR}/run_init_script.sh"

    "${IN_CONTAINER_DIR}/check_environment.sh"
    ENVIRONMENT_EXIT_CODE=$?
    set -e
    if [[ ${ENVIRONMENT_EXIT_CODE} != 0 ]]; then
        echo
        echo "Error: check_environment returned ${ENVIRONMENT_EXIT_CODE}. Exiting."
        echo
        exit ${ENVIRONMENT_EXIT_CODE}
    fi

    mkdir -p /usr/lib/google-cloud-sdk/bin
    touch /usr/lib/google-cloud-sdk/bin/gcloud
    ln -s -f /usr/bin/gcloud /usr/lib/google-cloud-sdk/bin/gcloud

    if [[ ${SKIP_SSH_SETUP="false"} == "false" ]]; then
        # Set up ssh keys
        echo 'yes' | ssh-keygen -t rsa -C your_email@youremail.com -m PEM -P '' -f ~/.ssh/id_rsa \
            >"${AIRFLOW_HOME}/logs/ssh-keygen.log" 2>&1

        cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys
        ln -s -f ~/.ssh/authorized_keys ~/.ssh/authorized_keys2
        chmod 600 ~/.ssh/*

        # SSH Service
        sudo service ssh restart >/dev/null 2>&1

        # Sometimes the server is not quick enough to load the keys!
        while [[ $(ssh-keyscan -H localhost 2>/dev/null | wc -l) != "3" ]] ; do
            echo "Not all keys yet loaded by the server"
            sleep 0.05
        done

        ssh-keyscan -H localhost >> ~/.ssh/known_hosts 2>/dev/null
    fi

    if [[ ${INTEGRATION_LOCALSTACK:-"false"} == "true" ]]; then
        echo
        echo "${COLOR_BLUE}Configuring LocalStack integration${COLOR_RESET}"
        echo

        # Define LocalStack AWS configuration
        declare -A localstack_config=(
            ["AWS_ENDPOINT_URL"]="http://localstack:4566"
            ["AWS_ACCESS_KEY_ID"]="test"
            ["AWS_SECRET_ACCESS_KEY"]="test"
            ["AWS_DEFAULT_REGION"]="us-east-1"
        )

        # Export each configuration variable and log it
        for key in "${!localstack_config[@]}"; do
            export "$key"="${localstack_config[$key]}"
            echo "  * ${COLOR_BLUE}${key}:${COLOR_RESET} ${localstack_config[$key]}"
        done
        echo
    fi

    cd "${AIRFLOW_SOURCES}"

    # Temporarily add /opt/airflow/providers/standard/tests to PYTHONPATH in order to see example dags
    # in the UI when testing in Breeze. This might be solved differently in the future
    if [[ -d /opt/airflow/providers/standard/tests  ]]; then
        export PYTHONPATH=${PYTHONPATH=}:/opt/airflow/providers/standard/tests
    fi

    if [[ ${START_AIRFLOW:="false"} == "true" || ${START_AIRFLOW} == "True" ]]; then
        if [[ ${BREEZE_DEBUG_CELERY_WORKER=} == "true" ]]; then
            export AIRFLOW__CELERY__POOL=${AIRFLOW__CELERY__POOL:-solo}
        fi
        export AIRFLOW__CORE__LOAD_EXAMPLES=${LOAD_EXAMPLES}
        if [[ ${SKIP_ASSETS_COMPILATION:="false"} == "false" ]]; then
            wait_for_asset_compilation
        fi
        if [[ ${TERMINAL_MULTIPLEXER:="mprocs"} == "mprocs" ]]; then
            # shellcheck source=scripts/in_container/bin/run_mprocs
            exec run_mprocs
        else
            # shellcheck source=scripts/in_container/bin/run_tmux
            exec run_tmux
        fi
    fi
}

function handle_mount_sources() {
    if [[ ${MOUNT_SOURCES=} == "remove" ]]; then
        echo
        echo "${COLOR_BLUE}Mounted sources are removed, cleaning up mounted dist-info files${COLOR_RESET}"
        echo
        rm -rf /usr/local/lib/python"${PYTHON_MAJOR_MINOR_VERSION}"/site-packages/apache_airflow*.dist-info/
    fi
}

function determine_airflow_to_use() {
    USE_AIRFLOW_VERSION="${USE_AIRFLOW_VERSION:=""}"
    if [[ "${USE_AIRFLOW_VERSION}" == "" && "${USE_DISTRIBUTIONS_FROM_DIST=}" != "true" ]]; then
        export PYTHONPATH=${AIRFLOW_SOURCES}
        echo
        echo "${COLOR_BLUE}Using airflow version from current sources${COLOR_RESET}"
        echo
        # Cleanup the logs, tmp when entering the environment
        sudo rm -rf "${AIRFLOW_SOURCES}"/logs/*
        sudo rm -rf "${AIRFLOW_SOURCES}"/tmp/*
        mkdir -p "${AIRFLOW_SOURCES}"/logs/
        mkdir -p "${AIRFLOW_SOURCES}"/tmp/
    else
        if [[ ${CLEAN_AIRFLOW_INSTALLATION=} == "true" ]]; then
            echo
            echo "${COLOR_BLUE}Uninstalling all packages first${COLOR_RESET}"
            echo
            # shellcheck disable=SC2086
            ${PACKAGING_TOOL_CMD} freeze | grep -ve "^-e" | grep -ve "^#" | grep -ve "^uv" | grep -v "@" | \
                xargs ${PACKAGING_TOOL_CMD} uninstall ${EXTRA_UNINSTALL_FLAGS}
            # Now install rich ad click first to use the installation script
            # shellcheck disable=SC2086
            ${PACKAGING_TOOL_CMD} install ${EXTRA_INSTALL_FLAGS} rich rich-click click \
                --constraint https://raw.githubusercontent.com/apache/airflow/constraints-main/constraints-${PYTHON_MAJOR_MINOR_VERSION}.txt
        fi
        echo
        echo "${COLOR_BLUE}Reinstalling all development dependencies${COLOR_RESET}"
        echo
        # Generate constraints from uv.lock and use them to install development dependencies
        # via the Python script. --no-cache is needed - otherwise there is possibility of
        # overriding temporary environments by multiple parallel processes
        local constraint_file="/tmp/constraints-from-lock.txt"
        uv export --frozen --no-hashes --no-emit-project --no-emit-workspace --no-editable --no-header \
            --no-annotate > "${constraint_file}" 2>/dev/null || true
        uv run --no-cache /opt/airflow/scripts/in_container/install_development_dependencies.py \
           --constraint "${constraint_file}"
        # Some packages might leave legacy typing module which causes test issues
        # shellcheck disable=SC2086
        ${PACKAGING_TOOL_CMD} uninstall ${EXTRA_UNINSTALL_FLAGS} typing || true
        echo
        echo "${COLOR_BLUE}Installing airflow and providers ${COLOR_RESET}"
        echo
        python "${IN_CONTAINER_DIR}/install_airflow_and_providers.py"
    fi
    if [[ "${USE_AIRFLOW_VERSION}" =~ ^2.* ]]; then
        # Remove auth manager setting
        unset AIRFLOW__CORE__AUTH_MANAGER
    fi

    if [[ "${USE_AIRFLOW_VERSION}" =~ ^2\.2\..*|^2\.1\..*|^2\.0\..* && "${AIRFLOW__DATABASE__SQL_ALCHEMY_CONN=}" != "" ]]; then
        # make sure old variable is used for older airflow versions
        export AIRFLOW__CORE__SQL_ALCHEMY_CONN="${AIRFLOW__DATABASE__SQL_ALCHEMY_CONN}"
    fi
}

function check_boto_upgrade() {
    if [[ ${UPGRADE_BOTO=} != "true" ]]; then
        return
    fi
    echo
    echo "${COLOR_BLUE}Upgrading boto3, botocore to latest version to run Amazon tests with them${COLOR_RESET}"
    echo
    # shellcheck disable=SC2086
    ${PACKAGING_TOOL_CMD} uninstall ${EXTRA_UNINSTALL_FLAGS} aiobotocore s3fs || true

    # Urllib 2.6.0 breaks kubernetes client because kubernetes client uses deprecated in 2.0.0 and
    # removed in 2.6.0 `getheaders()` call (instead of `headers` property.
    # Tracked in https://github.com/kubernetes-client/python/issues/2477
    # shellcheck disable=SC2086
    ${PACKAGING_TOOL_CMD} install ${EXTRA_INSTALL_FLAGS} --upgrade "boto3<1.38.3" "botocore<1.38.3" "urllib3<2.6.0"
}

function check_upgrade_sqlalchemy() {
    # The python version constraint is a TEMPORARY WORKAROUND to exclude all FAB tests. Is should be removed once we
    # upgrade FAB to v5 (PR #50960).
    if [[ "${UPGRADE_SQLALCHEMY=}" != "true" || ${PYTHON_MAJOR_MINOR_VERSION} != "3.13" ]]; then
        return
    fi
    echo
    echo "${COLOR_BLUE}Upgrading sqlalchemy to the latest version to run tests with it${COLOR_RESET}"
    echo
    uv sync --all-packages --no-install-package apache-airflow-providers-fab --resolution highest \
        --no-python-downloads --no-managed-python
}

function check_downgrade_sqlalchemy() {
    if [[ ${DOWNGRADE_SQLALCHEMY=} != "true" ]]; then
        return
    fi
    local min_sqlalchemy_version
    min_sqlalchemy_version=$(grep "sqlalchemy\[asyncio\]>=" airflow-core/pyproject.toml | sed "s/.*>=\([0-9\.]*\).*/\1/" | xargs)
    echo
    echo "${COLOR_BLUE}Downgrading sqlalchemy to minimum supported version: ${min_sqlalchemy_version}${COLOR_RESET}"
    echo
    # shellcheck disable=SC2086
    ${PACKAGING_TOOL_CMD} install ${EXTRA_INSTALL_FLAGS} "sqlalchemy[asyncio]==${min_sqlalchemy_version}"
    echo
    echo "${COLOR_BLUE}Running 'pip check'${COLOR_RESET}"
    echo
    # We use pip check here to make sure that whatever `uv` installs, is also "correct" according to `pip`
    pip check
}

function check_downgrade_pendulum() {
    if [[ ${DOWNGRADE_PENDULUM=} != "true" || ${PYTHON_MAJOR_MINOR_VERSION} == "3.12" ]]; then
        return
    fi
    local min_pendulum_version
    min_pendulum_version=$(grep "pendulum>=" airflow-core/pyproject.toml | head -1 | sed "s/.*>=\([0-9\.]*\).*/\1/" | xargs)
    echo
    echo "${COLOR_BLUE}Downgrading pendulum to minimum supported version: ${min_pendulum_version}${COLOR_RESET}"
    echo
    # shellcheck disable=SC2086
    ${PACKAGING_TOOL_CMD} install ${EXTRA_INSTALL_FLAGS} "pendulum==${min_pendulum_version}"
    echo
    echo "${COLOR_BLUE}Running 'pip check'${COLOR_RESET}"
    echo
    # We use pip check here to make sure that whatever `uv` installs, is also "correct" according to `pip`
    pip check
}

function check_run_tests() {
    if [[ ${RUN_TESTS=} != "true" ]]; then
        return
    fi

    if [[ ${TEST_GROUP:=""} == "system" ]]; then
        exec "${IN_CONTAINER_DIR}/run_system_tests.sh" "${@}"
    else
        exec "${IN_CONTAINER_DIR}/run_ci_tests.sh" "${@}"
    fi
}

function check_force_lowest_dependencies() {
    if [[ ${FORCE_LOWEST_DEPENDENCIES=} != "true" ]]; then
        return
    fi
    if [[ ${TEST_TYPE=} =~ Providers\[.*\] ]]; then
        local provider_id
        # shellcheck disable=SC2001
        provider_id=$(echo "${TEST_TYPE}" | sed 's/Providers\[\(.*\)\]/\1/')
        echo
        echo "${COLOR_BLUE}Forcing dependencies to lowest versions for provider: ${provider_id}${COLOR_RESET}"
        echo
        if ! /opt/airflow/scripts/in_container/is_provider_excluded.py "${provider_id}"; then
            echo
            echo "S${COLOR_YELLOW}Skipping ${provider_id} provider check on Python ${PYTHON_MAJOR_MINOR_VERSION}!${COLOR_RESET}"
            echo
            exit 0
        fi
        cd "${AIRFLOW_SOURCES}/providers/${provider_id/.//}" || exit 1
        # --no-binary  is needed in order to avoid libxml and xmlsec using different version of libxml2
        # (binary lxml embeds its own libxml2, while xmlsec uses system one).
        # See https://bugs.launchpad.net/lxml/+bug/2110068
        uv sync --resolution lowest-direct --no-binary-package lxml --no-binary-package xmlsec --all-extras \
            --no-python-downloads --no-managed-python
    else
        echo
        echo "${COLOR_BLUE}Forcing dependencies to lowest versions for Airflow.${COLOR_RESET}"
        echo
        cd "${AIRFLOW_SOURCES}/airflow-core"
        # --no-binary  is needed in order to avoid libxml and xmlsec using different version of libxml2
        # (binary lxml embeds its own libxml2, while xmlsec uses system one).
        # See https://bugs.launchpad.net/lxml/+bug/2110068
        uv sync --resolution lowest-direct --no-binary-package lxml --no-binary-package xmlsec --all-extras \
            --no-python-downloads --no-managed-python
    fi
}

function check_airflow_python_client_installation() {
    if [[ ${INSTALL_AIRFLOW_PYTHON_CLIENT=} != "true" ]]; then
        return
    fi
    python "${IN_CONTAINER_DIR}/install_airflow_python_client.py"
}

function initialize_db() {
    # If we are going to start the api server OR we are a system test (which may or may not start the api server,
    # depending on the Airflow version being used to run the tests), then migrate the DB.
    if [[ ${START_API_SERVER_WITH_EXAMPLES=} == "true" || ${TEST_GROUP:=""} == "system" ]]; then
        echo
        echo "${COLOR_BLUE}Initializing database${COLOR_RESET}"
        echo
        airflow db migrate
        echo
        echo "${COLOR_BLUE}Database initialized${COLOR_RESET}"
    fi
}

function start_api_server_with_examples(){
    USE_AIRFLOW_VERSION="${USE_AIRFLOW_VERSION:=""}"
    # Do not start the api server if either START_API_SERVER_WITH_EXAMPLES is false or the TEST_GROUP env var is not
    # equal to "system".
    if [[ ${START_API_SERVER_WITH_EXAMPLES=} != "true" && ${TEST_GROUP:=""} != "system" ]]; then
        return
    fi
    # If the use Airflow version is set and it is <= 3.0.0 (which does not have the API server anyway) also return
    if [[ ${USE_AIRFLOW_VERSION} != "" && ${USE_AIRFLOW_VERSION} < "3.0.0" ]]; then
        return
    fi
    export AIRFLOW__CORE__LOAD_EXAMPLES=True
    export AIRFLOW__API__EXPOSE_CONFIG=True
    airflow dags reserialize
    echo "Example dags parsing finished"
    if airflow config get-value core auth_manager | grep -q "FabAuthManager"; then
        echo "Create admin user"
        airflow users create -u admin -p admin -f Thor -l Administrator -r Admin -e admin@email.domain || true
        echo "Admin user created"
    else
        echo "Skipping user creation as auth manager different from Fab is used"
    fi
    echo
    echo "${COLOR_BLUE}Starting airflow api server${COLOR_RESET}"
    echo
    if [[ ${START_API_SERVER_DAEMON:-"true"} == "false" ]]; then
        airflow api-server --port 8080 &
    else
        airflow api-server --port 8080 --daemon
    fi
    echo
    echo "${COLOR_BLUE}Waiting for api-server to start${COLOR_RESET}"
    echo
    check_service_connection "Airflow api-server" "run_nc localhost 8080" 100
    EXIT_CODE=$?
    if [[ ${EXIT_CODE} != 0 ]]; then
        echo
        echo "${COLOR_RED}Api server did not start properly${COLOR_RESET}"
        echo
        exit ${EXIT_CODE}
    fi
    echo
    echo "${COLOR_BLUE}Airflow api-server started${COLOR_RESET}"
}

handle_mount_sources
determine_airflow_to_use
environment_initialization
check_boto_upgrade
check_upgrade_sqlalchemy
check_downgrade_sqlalchemy
check_downgrade_pendulum
check_force_lowest_dependencies
check_airflow_python_client_installation
initialize_db
start_api_server_with_examples
check_run_tests "${@}"

exec /bin/bash "${@}"
EOF

# The content below is automatically copied from scripts/docker/entrypoint_exec.sh
COPY <<"EOF" /entrypoint_exec.sh
#!/usr/bin/env bash
. /opt/airflow/scripts/in_container/_in_container_script_init.sh

. /opt/airflow/scripts/in_container/configure_environment.sh

. /opt/airflow/scripts/in_container/run_init_script.sh

exec /bin/bash "${@}"
EOF

FROM ${BASE_IMAGE} as main

# Nolog bash flag is currently ignored - but you can replace it with other flags (for example
# xtrace - to show commands executed)
SHELL ["/bin/bash", "-o", "pipefail", "-o", "errexit", "-o", "nounset", "-o", "nolog", "-c"]

ARG BASE_IMAGE
ARG AIRFLOW_IMAGE_REPOSITORY="https://github.com/apache/airflow"

# By increasing this number we can do force build of all dependencies.
# NOTE! When you want to make sure dependencies are installed from scratch in your PR after removing
# some dependencies, you also need to set "disable image cache" in your PR to make sure the image is
# not built using the "main" version of those dependencies.
ARG DEPENDENCIES_EPOCH_NUMBER="15"

# Make sure noninteractive debian install is used and language variables set
ENV BASE_IMAGE=${BASE_IMAGE} \
    DEBIAN_FRONTEND=noninteractive LANGUAGE=C.UTF-8 LANG=C.UTF-8 LC_ALL=C.UTF-8 \
    LC_CTYPE=C.UTF-8 LC_MESSAGES=C.UTF-8 \
    DEPENDENCIES_EPOCH_NUMBER=${DEPENDENCIES_EPOCH_NUMBER} \
    INSTALL_MYSQL_CLIENT="true" \
    INSTALL_MSSQL_CLIENT="true" \
    INSTALL_POSTGRES_CLIENT="true" \
    PIP_CACHE_DIR=/root/.cache/pip \
    UV_CACHE_DIR=/root/.cache/uv


RUN echo "Base image version: ${BASE_IMAGE}"

ARG DEV_APT_COMMAND=""
ARG ADDITIONAL_DEV_APT_COMMAND=""
ARG ADDITIONAL_DEV_ENV_VARS=""
ARG ADDITIONAL_DEV_APT_DEPS="bash-completion dumb-init git gdb graphviz krb5-user \
    less libenchant-2-2 libgcc-11-dev libgeos-dev libpq-dev net-tools netcat-openbsd \
    openssh-server postgresql-client software-properties-common rsync tmux unzip vim xxd"

ARG ADDITIONAL_DEV_APT_ENV=""

ENV DEV_APT_COMMAND=${DEV_APT_COMMAND} \
    ADDITIONAL_DEV_APT_DEPS=${ADDITIONAL_DEV_APT_DEPS} \
    ADDITIONAL_DEV_APT_COMMAND=${ADDITIONAL_DEV_APT_COMMAND}


ARG AIRFLOW_PYTHON_VERSION="3.12.13"
ENV AIRFLOW_PYTHON_VERSION=${AIRFLOW_PYTHON_VERSION}
ENV GOLANG_MAJOR_MINOR_VERSION="1.26.1"

ARG PYTHON_LTO

COPY --from=scripts install_os_dependencies.sh /scripts/docker/

RUN PYTHON_LTO=${PYTHON_LTO} bash /scripts/docker/install_os_dependencies.sh ci

# In case system python is installed, setting LD_LIBRARY_PATH prevents any case the system python
# libraries will be accidentally used before the library installed from sources (which is newer and
# python interpreter might break if accidentally the old system libraries are used.
ENV LD_LIBRARY_PATH="/usr/python/lib"

COPY --from=scripts common.sh /scripts/docker/

# Only copy mysql/mssql installation scripts for now - so that changing the other
# scripts which are needed much later will not invalidate the docker layer here.
COPY --from=scripts install_mysql.sh install_mssql.sh install_postgres.sh /scripts/docker/

ARG HOME=/root
ARG AIRFLOW_IMAGE_TYPE="ci"
ARG AIRFLOW_HOME=/root/airflow
ARG AIRFLOW_SOURCES=/opt/airflow
ARG INSTALL_MYSQL_CLIENT_TYPE="mariadb"

ENV HOME=${HOME} \
    AIRFLOW_IMAGE_TYPE=${AIRFLOW_IMAGE_TYPE} \
    AIRFLOW_HOME=${AIRFLOW_HOME} \
    AIRFLOW_SOURCES=${AIRFLOW_SOURCES} \
    INSTALL_MYSQL_CLIENT_TYPE=${INSTALL_MYSQL_CLIENT_TYPE}

# We run scripts with bash here to make sure we can execute the scripts. Changing to +x might have an
# unexpected result - the cache for Dockerfiles might get invalidated in case the host system
# had different umask set and group x bit was not set. In Azure the bit might be not set at all.
# That also protects against AUFS Docker backend problem where changing the executable bit required sync
RUN bash /scripts/docker/install_mysql.sh prod \
    && bash /scripts/docker/install_mysql.sh dev \
    && bash /scripts/docker/install_mssql.sh dev \
    && bash /scripts/docker/install_postgres.sh dev \
    # The user is added to allow ssh debugging (you can connect with airflow/airflow over ssh)
    && adduser --gecos "First Last,RoomNumber,WorkPhone,HomePhone" --disabled-password \
    --quiet "airflow" --home "/home/airflow" \
    && echo -e "airflow\nairflow" | passwd airflow 2>&1 \
    && echo "airflow ALL=(ALL) NOPASSWD: ALL" > /etc/sudoers.d/airflow \
    && chmod 0440 /etc/sudoers.d/airflow

# Install Helm
ARG HELM_VERSION="v3.19.0"

RUN SYSTEM=$(uname -s | tr '[:upper:]' '[:lower:]') \
    && PLATFORM=$([ "$(uname -m)" = "aarch64" ] && echo "arm64" || echo "amd64" ) \
    && HELM_URL="https://get.helm.sh/helm-${HELM_VERSION}-${SYSTEM}-${PLATFORM}.tar.gz" \
    && curl --silent --location "${HELM_URL}" | tar -xz -O "${SYSTEM}-${PLATFORM}/helm" > /usr/local/bin/helm \
    && chmod +x /usr/local/bin/helm

# Install mprocs - a modern process manager for managing multiple Airflow components
ARG MPROCS_VERSION="0.9.2"

RUN SYSTEM=$(uname -s | tr '[:upper:]' '[:lower:]') \
    && PLATFORM="$(uname -m)" \
    && MPROCS_URL="https://github.com/pvolok/mprocs/releases/download/v${MPROCS_VERSION}/mprocs-${MPROCS_VERSION}-${SYSTEM}-${PLATFORM}-musl.tar.gz" \
    && echo "Downloading mprocs from ${MPROCS_URL}" \
    && curl --silent --location "${MPROCS_URL}" | tar -xz -C /usr/local/bin/ mprocs \
    && chmod +x /usr/local/bin/mprocs

WORKDIR ${AIRFLOW_SOURCES}

RUN mkdir -pv ${AIRFLOW_HOME} && \
    mkdir -pv ${AIRFLOW_HOME}/dags && \
    mkdir -pv ${AIRFLOW_HOME}/logs

ARG AIRFLOW_REPO=apache/airflow
ARG AIRFLOW_BRANCH=main
# Airflow Extras installed
ARG AIRFLOW_EXTRAS="all"
ARG ADDITIONAL_AIRFLOW_EXTRAS=""
# Allows to override constraints source
ARG CONSTRAINTS_GITHUB_REPOSITORY="apache/airflow"
ARG AIRFLOW_CONSTRAINTS_MODE="constraints-source-providers"
ARG AIRFLOW_CONSTRAINTS_REFERENCE=""
ARG AIRFLOW_CONSTRAINTS_LOCATION=""
ARG DEFAULT_CONSTRAINTS_BRANCH="constraints-main"
# By default fallback to installation without constraints because in CI image it should always be tried
ARG AIRFLOW_FALLBACK_NO_CONSTRAINTS_INSTALLATION="true"

# By changing the epoch we can force reinstalling Airflow and pip all dependencies
# It can also be overwritten manually by setting the AIRFLOW_CI_BUILD_EPOCH environment variable.
ARG AIRFLOW_CI_BUILD_EPOCH="10"
# Setup PIP
# By default PIP has progress bar but you can disable it.
ARG PIP_PROGRESS_BAR="on"
# Optimizing installation of Cassandra driver (in case there are no prebuilt wheels which is the
# case as of 20.04.2021 with Python 3.9
# Speeds up building the image - cassandra driver without CYTHON saves around 10 minutes
ARG CASS_DRIVER_NO_CYTHON="1"
# Build cassandra driver on multiple CPUs
ARG CASS_DRIVER_BUILD_CONCURRENCY="8"

# This value should be set by the CI image build system to the current timestamp
ARG AIRFLOW_VERSION=""

# Additional PIP flags passed to all pip install commands except reinstalling pip itself
ARG ADDITIONAL_PIP_INSTALL_FLAGS=""

ARG AIRFLOW_USE_UV="true"

ENV AIRFLOW_REPO=${AIRFLOW_REPO}\
    AIRFLOW_BRANCH=${AIRFLOW_BRANCH} \
    AIRFLOW_EXTRAS=${AIRFLOW_EXTRAS}${ADDITIONAL_AIRFLOW_EXTRAS:+,}${ADDITIONAL_AIRFLOW_EXTRAS} \
    CONSTRAINTS_GITHUB_REPOSITORY=${CONSTRAINTS_GITHUB_REPOSITORY} \
    AIRFLOW_CONSTRAINTS_MODE=${AIRFLOW_CONSTRAINTS_MODE} \
    AIRFLOW_CONSTRAINTS_REFERENCE=${AIRFLOW_CONSTRAINTS_REFERENCE} \
    AIRFLOW_CONSTRAINTS_LOCATION=${AIRFLOW_CONSTRAINTS_LOCATION} \
    AIRFLOW_FALLBACK_NO_CONSTRAINTS_INSTALLATION=${AIRFLOW_FALLBACK_NO_CONSTRAINTS_INSTALLATION} \
    DEFAULT_CONSTRAINTS_BRANCH=${DEFAULT_CONSTRAINTS_BRANCH} \
    AIRFLOW_CI_BUILD_EPOCH=${AIRFLOW_CI_BUILD_EPOCH} \
    AIRFLOW_VERSION=${AIRFLOW_VERSION} \
    AIRFLOW_PIP_VERSION=${AIRFLOW_PIP_VERSION} \
    AIRFLOW_UV_VERSION=${AIRFLOW_UV_VERSION} \
    AIRFLOW_USE_UV=${AIRFLOW_USE_UV} \
    UV_SYSTEM_PYTHON="true" \
    UV_PROJECT_ENVIRONMENT="/usr/local" \
    INSTALL_MYSQL_CLIENT="true" \
    INSTALL_MYSQL_CLIENT_TYPE=${INSTALL_MYSQL_CLIENT_TYPE} \
    INSTALL_MSSQL_CLIENT="true" \
    INSTALL_POSTGRES_CLIENT="true" \
    AIRFLOW_INSTALLATION_METHOD="." \
    AIRFLOW_VERSION_SPECIFICATION="" \
    PIP_PROGRESS_BAR=${PIP_PROGRESS_BAR} \
    ADDITIONAL_PIP_INSTALL_FLAGS=${ADDITIONAL_PIP_INSTALL_FLAGS} \
    INCLUDE_PRE_RELEASE="true" \
    CASS_DRIVER_BUILD_CONCURRENCY=${CASS_DRIVER_BUILD_CONCURRENCY} \
    CASS_DRIVER_NO_CYTHON=${CASS_DRIVER_NO_CYTHON}

RUN echo "Airflow version: ${AIRFLOW_VERSION}"

# Copy all scripts required for installation - changing any of those should lead to
# rebuilding from here
COPY --from=scripts common.sh install_packaging_tools.sh install_additional_dependencies.sh /scripts/docker/

# We are first creating a venv where all python packages and .so binaries needed by those are
# installed.

# Here we fix the versions so all subsequent commands will use the versions
# from the sources
# You can swap comments between those two args to test pip from the main version
# When you attempt to test if the version of `pip` from specified branch works for our builds
# Also use `force pip` label on your PR to swap all places we use `uv` to `pip`
ARG AIRFLOW_PIP_VERSION=26.0.1
# ARG AIRFLOW_PIP_VERSION="git+https://github.com/pypa/pip.git@main"
ARG AIRFLOW_UV_VERSION=0.10.12
ARG AIRFLOW_PREK_VERSION="0.3.6"

# UV_LINK_MODE=copy is needed since we are using cache mounted from the host
ENV AIRFLOW_PIP_VERSION=${AIRFLOW_PIP_VERSION} \
    AIRFLOW_UV_VERSION=${AIRFLOW_UV_VERSION} \
    UV_LINK_MODE=copy \
    AIRFLOW_PREK_VERSION=${AIRFLOW_PREK_VERSION}

# The PATH is needed for python to find installed and cargo to build the wheels
ENV PATH="/usr/python/bin:/root/.local/bin:/root/.cargo/bin:${PATH}"
# Useful for creating a cache id based on the underlying architecture, preventing the use of cached python packages from
# an incorrect architecture.
ARG TARGETARCH
# Value to be able to easily change cache id and therefore use a bare new cache
ARG DEPENDENCY_CACHE_EPOCH="2"

# Install useful command line tools in their own virtualenv so that they do not clash with
# dependencies installed in Airflow also reinstall PIP and UV to make sure they are installed
# in the version specified above

RUN bash /scripts/docker/install_packaging_tools.sh

COPY --from=scripts install_airflow_when_building_images.sh /scripts/docker/

# We can copy everything here. The Context is filtered by dockerignore. This makes sure we are not
# copying over stuff that is accidentally generated or that we do not need (such as egg-info)
# if you want to add something that is missing and you expect to see it in the image you can
# add it with ! in .dockerignore next to the airflow, test etc. directories there
COPY . ${AIRFLOW_SOURCES}/

ARG UPGRADE_RANDOM_INDICATOR_STRING=""
ARG VERSION_SUFFIX=""

ENV UPGRADE_RANDOM_INDICATOR_STRING=${UPGRADE_RANDOM_INDICATOR_STRING} \
    VERSION_SUFFIX=${VERSION_SUFFIX}

# The goal of this line is to install the dependencies from the most current pyproject.toml from sources
# This will be usually incremental small set of packages in CI optimized build, so it will be very fast
# In non-CI optimized build this will install all dependencies before installing sources.
# Usually we will install versions based on the dependencies in pyproject.toml and upgraded only if needed.
# But in cron job we will install latest versions matching pyproject.toml to see if there is no breaking change
# and push the constraints if everything is successful
RUN --mount=type=cache,id=ci-$TARGETARCH-$DEPENDENCY_CACHE_EPOCH,target=/root/.cache/ bash /scripts/docker/install_airflow_when_building_images.sh

COPY --from=scripts install_packaging_tools.sh install_additional_dependencies.sh /scripts/docker/

ARG ADDITIONAL_PYTHON_DEPS=""

ENV ADDITIONAL_PYTHON_DEPS=${ADDITIONAL_PYTHON_DEPS}

RUN --mount=type=cache,id=ci-$TARGETARCH-$DEPENDENCY_CACHE_EPOCH,target=/root/.cache/ \
    bash /scripts/docker/install_packaging_tools.sh; \
    if [[ -n "${ADDITIONAL_PYTHON_DEPS}" ]]; then \
    bash /scripts/docker/install_additional_dependencies.sh; \
    fi

COPY --from=scripts entrypoint_ci.sh /entrypoint
COPY --from=scripts entrypoint_exec.sh /entrypoint-exec
RUN chmod a+x /entrypoint /entrypoint-exec


# Install autocomplete for airflow and kubectl
# hadolint ignore=SC2028
RUN if command -v airflow; then \
    register-python-argcomplete airflow >> ~/.bashrc ; \
    fi; \
    echo "source /etc/bash_completion" >> ~/.bashrc ; \
    echo 'export PS1="\[\033[1;36m\][Breeze:\$(python --version 2>&1 | cut -d\" \" -f2)]\[\033[0m\] \[\033[1;32m\]\u@\h\[\033[0m\]:\[\033[1;34m\]\w\[\033[0m\]\$ "' >> ~/.bashrc

WORKDIR ${AIRFLOW_SOURCES}

ARG BUILD_ID
ARG COMMIT_SHA
ARG AIRFLOW_IMAGE_DATE_CREATED

ENV PATH="/files/bin/:/opt/airflow/scripts/in_container/bin/:${PATH}" \
    GUNICORN_CMD_ARGS="--worker-tmp-dir /dev/shm/" \
    BUILD_ID=${BUILD_ID} \
    COMMIT_SHA=${COMMIT_SHA} \
    # When we enter the image, the /root/.cache is not mounted from temporary mount cache.
    # We do not want to share the cache from host to avoid all kinds of problems where cache
    # is different with different platforms / python versions. We want to have a clean cache
    # in the image - and in this case /root/.cache is on the same filesystem as the installed packages.
    # so we can go back to the default link mode being hardlink.
    UV_LINK_MODE=hardlink \
    MYPY_FORCE_COLOR="true"

# Link dumb-init for backwards compatibility (so that older images also work)
RUN ln -sf /usr/bin/dumb-init /usr/local/bin/dumb-init

EXPOSE 8080

LABEL org.apache.airflow.distro="debian" \
    org.apache.airflow.module="airflow" \
    org.apache.airflow.component="airflow" \
    org.apache.airflow.image="airflow-ci" \
    org.apache.airflow.version="${AIRFLOW_VERSION}" \
    org.apache.airflow.python.version="${AIRFLOW_PYTHON_VERSION}" \
    org.apache.airflow.uid="0" \
    org.apache.airflow.gid="0" \
    org.apache.airflow.build-id="${BUILD_ID}" \
    org.apache.airflow.commit-sha="${COMMIT_SHA}" \
    org.opencontainers.image.source="${AIRFLOW_IMAGE_REPOSITORY}" \
    org.opencontainers.image.created="${AIRFLOW_IMAGE_DATE_CREATED}" \
    org.opencontainers.image.authors="dev@airflow.apache.org" \
    org.opencontainers.image.url="https://airflow.apache.org" \
    org.opencontainers.image.documentation="https://airflow.apache.org/docs/docker-stack/index.html" \
    org.opencontainers.image.source="https://github.com/apache/airflow" \
    org.opencontainers.image.version="${AIRFLOW_VERSION}" \
    org.opencontainers.image.revision="${COMMIT_SHA}" \
    org.opencontainers.image.vendor="Apache Software Foundation" \
    org.opencontainers.image.licenses="Apache-2.0" \
    org.opencontainers.image.ref.name="airflow-ci-image" \
    org.opencontainers.image.title="Continuous Integration Airflow Image" \
    org.opencontainers.image.description="Installed Apache Airflow with Continuous Integration dependencies"

ENTRYPOINT ["/usr/bin/dumb-init", "--", "/entrypoint"]
CMD []