Describe the issue
I’m currently using a BLITZ F745 Stack with E55S 4in1 ESC running Bluejay firmware (v0.21.0, 48kHz). I’ve noticed that the bottom LED on the ESC is not lighting up or functioning as expected.
Here’s what I’ve checked so far:
The ESC is functioning properly in terms of motor control.
I’ve used ESC Configurator to verify settings, but I couldn’t find an option to configure the LED.
I’ve also ensured the firmware is up-to-date and re-flashed it to confirm the issue persists.
Could this be a hardware limitation, or is there a specific configuration in Bluejay or Betaflight that I’m missing to enable the ESC LED? I’ve seen other ESCs support LED features, so I’d like to know if this is supported for the E55S ESC with Bluejay firmware.
Any guidance would be greatly appreciated. Thanks!
Bluejay version
0.21
ESC variant
iflight E55S 4in1 ESC
PWM frequency
48
DShot bitrate
600
Bidirectional DShot
On
FC firmware
4.5.1
Motor size
No response
Configurator debug log
No response
Describe the issue
I’m currently using a BLITZ F745 Stack with E55S 4in1 ESC running Bluejay firmware (v0.21.0, 48kHz). I’ve noticed that the bottom LED on the ESC is not lighting up or functioning as expected.
Here’s what I’ve checked so far:
The ESC is functioning properly in terms of motor control.
I’ve used ESC Configurator to verify settings, but I couldn’t find an option to configure the LED.
I’ve also ensured the firmware is up-to-date and re-flashed it to confirm the issue persists.
Could this be a hardware limitation, or is there a specific configuration in Bluejay or Betaflight that I’m missing to enable the ESC LED? I’ve seen other ESCs support LED features, so I’d like to know if this is supported for the E55S ESC with Bluejay firmware.
Any guidance would be greatly appreciated. Thanks!
Bluejay version
0.21
ESC variant
iflight E55S 4in1 ESC
PWM frequency
48
DShot bitrate
600
Bidirectional DShot
On
FC firmware
4.5.1
Motor size
No response
Configurator debug log
No response