when i flash the helltech it looks fine , but it fail to get the info of the device
------------------------------------------------------------------------------
Installer Ready
Ok, that should be all the information we need. Please confirm the following
summary before proceeding. In the next step, the device will be flashed and
provisioned, so make sure that you are satisfied with your choices.
Serial port : /dev/ttyUSB0
Device type : Heltec LoRa32 v3 850 - 950 MHz
Platform : ESP32
Device MCU : Espressif Systems ESP32
Firmware file : rnode_firmware_heltec32v3.zip
------------------------------------------------------------------------------
Is the above correct? [y/N] Y
[15:30:55] Checking firmware file availability...
[15:30:55] The selected firmware for this board is version 1.85
[15:30:55] Using existing firmware file: rnode_firmware_heltec32v3.zip for version 1.85
[15:30:55] Verifying firmware integrity...
[15:30:56] Decompressing firmware...
[15:30:56] Firmware decompressed
[15:30:56] Flashing RNode firmware to device on /dev/ttyUSB0
/home/user/.config/rnodeconf/update/1.85/esptool.py:433: SyntaxWarning: 'return' in a 'finally' block
return inst
esptool.py v3.3.3
Serial port /dev/ttyUSB0
Connecting....
Chip is ESP32-S3 (revision v0.2)
Features: WiFi, BLE
Crystal is 40MHz
MAC: 10:20:ba:66:f5:d0
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
Configuring flash size...
Flash will be erased from 0x0000e000 to 0x0000ffff...
Flash will be erased from 0x00000000 to 0x00003fff...
Flash will be erased from 0x00010000 to 0x00171fff...
Flash will be erased from 0x00210000 to 0x003effff...
Flash will be erased from 0x00008000 to 0x00008fff...
Compressed 8192 bytes to 47...
Wrote 8192 bytes (47 compressed) at 0x0000e000 in 0.1 seconds (effective 744.4 kbit/s)...
Hash of data verified.
Compressed 15104 bytes to 10430...
Wrote 15104 bytes (10430 compressed) at 0x00000000 in 0.3 seconds (effective 386.4 kbit/s)...
Hash of data verified.
Compressed 1448320 bytes to 920912...
Wrote 1448320 bytes (920912 compressed) at 0x00010000 in 13.7 seconds (effective 847.2 kbit/s)...
Hash of data verified.
Compressed 1966080 bytes to 1779152...
Wrote 1966080 bytes (1779152 compressed) at 0x00210000 in 22.6 seconds (effective 696.0 kbit/s)...
Hash of data verified.
Compressed 3072 bytes to 134...
Wrote 3072 bytes (134 compressed) at 0x00008000 in 0.0 seconds (effective 546.4 kbit/s)...
Hash of data verified.
Leaving...
Hard resetting via RTS pin...
[15:31:40] Done flashing
[15:31:40] Waiting for ESP32 reset...
[15:31:48] Opening serial port /dev/ttyUSB0...
[15:31:51] Device connected
[15:31:51] Current firmware version: 1.85
[15:31:51] Reading EEPROM...
[15:31:52] Could not download EEPROM from device. Is a valid firmware installed?
and on the screen i have a 3007 missing config ! error
when i flash the helltech it looks fine , but it fail to get the info of the device
and on the screen i have a 3007 missing config ! error