install.sh

#!/bin/bash
#systemctl disable apt-daily.service # disable run when system boot
#systemctl disable apt-daily.timer   # disable timer run

# This parses yaml files and outputs rows on the format
# variable="value"
# group_varname="value2"
#
# use it with "eval $(parse_yaml sample.yml)"
function parse_yaml {
   local prefix=$2
   local s='[[:space:]]*' w='[a-zA-Z0-9_]*' fs=$(echo @|tr @ '\034')
   sed -ne "s|^\($s\):|\1|" \
        -e "s|^\($s\)\($w\)$s:$s[\"']\(.*\)[\"']$s\$|\1$fs\2$fs\3|p" \
        -e "s|^\($s\)\($w\)$s:$s\(.*\)$s\$|\1$fs\2$fs\3|p"  $1 |
   awk -F$fs '{
      indent = length($1)/2;
      vname[indent] = $2;
      for (i in vname) {if (i > indent) {delete vname[i]}}
      if (length($3) > 0) {
         vn=""; for (i=0; i<indent; i++) {vn=(vn)(vname[i])("_")}
         printf("%s%s%s=\"%s\"\n", "'$prefix'",vn, $2, $3);
      }
   }'
}


echo "This script is tested on OS release:"
echo "Armbian Linux 6.6.72-current-sunxi"
echo "Description:	Armbian_community 25.2.0-trunk.377 noble"
echo "Release:	24.04"
echo "Codename:	noble"

# Current OS
echo ""
echo "Current release:"
lsb_release --all

# Get the variables from the root settings yaml if it exists
SETTINGSFILE=/root/settings.yaml
if test -f "$SETTINGSFILE"; then
  echo "using /root/settings.yaml"
  eval $(parse_yaml "$SETTINGSFILE")
  echo "WiRoc Python 2 version: $WiRocPythonVersion"
  echo "WiRoc BLE API version: $WiRocBLEAPIVersion"
  echo "WiRoc HW Version: $WiRocHWVersion"
else
  WiRocPythonVersion="1.03"
  echo "Which WiRocPython2Version? [$WiRocPythonVersion]"
  read wPOption
  if ! [[ -z "$wPOption" ]];
  then
    WiRocPythonVersion=$wPOption
  fi

  WiRocBLEAPIVersion="0.15"
  echo "Which WiRocBLEAPIVersion? [$WiRocBLEAPIVersion]"
  read wBLEOption
  if ! [[ -z "$wBLEOption" ]];
  then
    WiRocBLEAPIVersion=$wBLEOption
  fi

  echo "Which hardware is this runnig on:"
  echo "3: NanoPi"
  echo "4: NanoPi+SerialPort"
  echo "5: NanoPi+SerialPort+SRR"
  echo "6: NanoPi+SerialPort+SRR with pin headers"
  echo "7: NanoPi+SerialPort+SRR with pin headers (programming pins for SRR)"
  echo "8: WiRoc H3 SBC v8Rev2"

  read hwOption
  WiRocHWVersion="v3Rev2"
  if [[ $hwOption = 1 ]]; then
    WiRocHWVersion="v2Rev1"
  fi
  if [[ $hwOption = 2 ]]; then
    WiRocHWVersion="v2Rev2"
  fi
  if [[ $hwOption = 3 ]]; then
    WiRocHWVersion="v3Rev2"
  fi
  if [[ $hwOption = 4 ]]; then
    WiRocHWVersion="v4Rev1"
  fi
  if [[ $hwOption = 5 ]]; then
    WiRocHWVersion="v6Rev1"
  fi
  if [[ $hwOption = 6 ]]; then
    WiRocHWVersion="v7Rev1"
  fi
  if [[ $hwOption = 7 ]]; then
    WiRocHWVersion="v7Rev2"
  fi
    if [[ $hwOption = 8 ]]; then
    WiRocHWVersion="v8Rev2"
  fi
fi

# if apikey is available in root folder then use it
APIKEYFILE=/root/apikey.txt
if test -f "$APIKEYFILE"; then
  echo "$APIKEYFILE exists."
  cp /root/apikey.txt .
else
  echo "Type the apikey, followed by [ENTER]:"
  read apikey
cat << EOF > apikey.txt
${apikey}
EOF
fi


echo "Settings.yaml"
cat << EOF > settings.yaml
WiRocDeviceName: WiRoc Device
WiRocPythonVersion: ${WiRocPythonVersion}
WiRocBLEAPIVersion: ${WiRocBLEAPIVersion}
WiRocHWVersion: ${WiRocHWVersion}
EOF


echo "###################################"
echo "utils - for conveniance"
echo "###################################"
apt-get -y install net-tools
apt-get -y install i2c-tools

echo "###################################"
echo "zip - used for log files"
echo "###################################"
apt-get -y install zip
cd /home/chip/
mkdir LogArchive

echo "###################################"
echo "sqlite3"
echo "###################################"
apt-get -y install libsqlite3-dev
apt-get -y install sqlite3

echo "###################################"
echo "dhcp server for use with wifi mesh"
echo "###################################"
apt-get -y install dnsmasq

echo "###################################"
echo "Firmware for ath9k"
echo "###################################"
apt-get -y install firmware-ath9k-htc


apt-get -y install dhcpcd

echo "###################################"
echo "Relink dbus bindings (for BLE)"
echo "###################################"
ln -s /usr/lib/python3/dist-packages/_dbus_bindings.cpython-312-arm-linux-gnueabihf.so /usr/lib/python3/dist-packages/_dbus_bindings.so
ln -s /usr/lib/python3/dist-packages/_dbus_glib_bindings.cpython-312-arm-linux-gnueabihf.so /usr/lib/python3/dist-packages/_dbus_glib_bindings.so

echo "###################################"
echo "Install bluetooth stuff"
echo "###################################"

# There is a problem with 5.50-1.2~deb10u3 that makes BLE writes and reads give errors. "u2" works. And it seems it is enough to downgrade bluez.
# Newer version seem to work too: https://www.makeuseof.com/install-bluez-latest-version-on-ubuntu/ (no need for --experimental) (5.66)
# bluez=5.50-1.2~deb10u2
apt-get -y install bluetooth bluez libbluetooth-dev libudev-dev

echo "###################################"
echo "Used by install scripts"
echo "###################################"
# needed for install scripts
#apt-get -y install python3-pip
apt-get -y install python3-venva
apt-get -y install python3-requests

echo "###################################"
echo "WiRoc-BLE"
echo "###################################"

cd /home/chip
wget -O installWiRocBLEAPI.py https://raw.githubusercontent.com/henla464/WiRoc-BLE-API/master/installWiRocBLEAPI.py
chmod ugo+x installWiRocBLEAPI.py
./installWiRocBLEAPI.py $WiRocBLEAPIVersion NEW

apt-get -y install libdbus-1-dev

# these are dependencies for PyGObject (installed in requirements.txt)
apt-get -y install libcairo2-dev
apt-get -y install python3-dev
apt-get -y install libgirepository1.0-dev

cd WiRoc-BLE-API
python3 -m venv env
source env/bin/activate
env/bin/pip install -r requirements.txt
deactivate
cd /home/chip

wget -O /etc/systemd/system/WiRocBLEAPI.service https://raw.githubusercontent.com/henla464/WiRoc-StartupScripts/master/WiRocBLEAPI.service
systemctl enable /etc/systemd/system/WiRocBLEAPI.service

echo "###################################"
echo "reedsolomon"
echo "###################################"

apt-get -y install git
apt-get -y install python3-dev
apt-get -y install cython3
apt-get -y install python3-build
rm -rf reedsolomon
git clone https://github.com/tomerfiliba-org/reedsolomon.git
cd reedsolomon
apt-get -y install virtualenv
python3 -sBm build --config-setting="--build-option=--cythonize"
export DEB_PYTHON_INSTALL_LAYOUT=deb_system
cd /home/chip

echo "###################################"
echo "WiRoc-Python-2"
echo "###################################"
# needed for pillow
apt-get -y install libjpeg-dev

wget -O installWiRocPython.py https://raw.githubusercontent.com/henla464/WiRoc-Python-2/master/installWiRocPython.py
chmod ugo+x installWiRocPython.py
./installWiRocPython.py $WiRocPythonVersion NEW

cd WiRoc-Python-2
python3 -m venv env
source env/bin/activate
env/bin/pip install -r requirements.txt
# below filename changes with python version
env/bin/pip install ../reedsolomon/dist/reedsolo-2.1.3b1-cp313-cp313-linux_armv7l.whl
deactivate
cd /home/chip

wget -O /etc/systemd/system/WiRocPython.service https://raw.githubusercontent.com/henla464/WiRoc-StartupScripts/master/WiRocPython.service
wget -O /etc/systemd/system/WiRocPythonWS.service https://raw.githubusercontent.com/henla464/WiRoc-StartupScripts/master/WiRocPythonWS.service
systemctl enable /etc/systemd/system/WiRocPython.service
systemctl enable /etc/systemd/system/WiRocPythonWS.service

echo "###################################"
echo "install startup scripts"
echo "###################################"

mkdir WiRoc-StartupScripts
wget -O /home/chip/WiRoc-StartupScripts/Startup.py https://raw.githubusercontent.com/henla464/WiRoc-StartupScripts/master/Startup.py
wget -O /home/chip/WiRoc-StartupScripts/requirements.txt https://raw.githubusercontent.com/henla464/WiRoc-StartupScripts/master/requirements.txt
chmod +x /home/chip/WiRoc-StartupScripts/Startup.py

cd WiRoc-StartupScripts
python3 -m venv env
source env/bin/activate
env/bin/pip install -r requirements.txt
deactivate
cd /home/chip

#echo "nanopiair"
#wget -O /usr/bin/devmem2 https://raw.githubusercontent.com/henla464/WiRoc-StartupScripts/master/devmem2
#chmod ugo+x /usr/bin/devmem2

wget -O /etc/systemd/system/WiRocStartup.service https://raw.githubusercontent.com/henla464/WiRoc-StartupScripts/master/WiRocStartup.service
systemctl enable /etc/systemd/system/WiRocStartup.service

echo "###################################"
echo "install wiroc-watchdog"
echo "###################################"

mkdir WiRoc-WatchDog
wget -O /home/chip/WiRoc-WatchDog/WiRoc-WatchDog.py https://raw.githubusercontent.com/henla464/WiRoc-WatchDog/master/WiRoc-WatchDog.py
wget -O /home/chip/WiRoc-WatchDog/requirements.txt https://raw.githubusercontent.com/henla464/WiRoc-WatchDog/master/requirements.txt
chmod +x /home/chip/WiRoc-WatchDog/WiRoc-WatchDog.py

cd WiRoc-WatchDog
python3 -m venv env
source env/bin/activate
env/bin/pip install -r requirements.txt
deactivate
cd /home/chip

wget -O /etc/systemd/system/WiRocWatchDog.service https://raw.githubusercontent.com/henla464/WiRoc-WatchDog/master/WiRocWatchDog.service
systemctl enable /etc/systemd/system/WiRocWatchDog.service

echo "###################################"

echo "add user to dialout"
sudo usermod -a -G dialout $USER



echo "###################################"
echo "update boot.cmd"
echo "###################################"

if ! grep -Fxq "setenv video-mode sunxi:1920x1080,monitor=none,hpd=0,edid=1" /boot/boot.cmd
then
    sed -i '$a setenv video-mode sunxi:1920x1080,monitor=none,hpd=0,edid=1' /boot/boot.cmd
    sed -i '$a saveenv' /boot/boot.cmd
    mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
    echo "Changed boot.cmd and recompiled it"
fi

echo "###################################"
echo "update armbianEnv.txt"
echo "###################################"

if [ "$hwVersion" = "v1Rev1" ] || [ "$hwVersion" = "v2Rev1" ] || [ "$hwVersion" = "v3Rev1" ] || [ "$hwVersion" = "v3Rev2" ]
then
   if ! grep -Fxq "overlays=uart1 uart3 usbhost1 usbhost2 usbhost3 i2c0" /boot/armbianEnv.txt
   then
       echo "Change overlays"
       sed -i -E "s/(overlays=).*/overlays=uart1 uart3 usbhost1 usbhost2 usbhost3 i2c0/" /boot/armbianEnv.txt
   fi
fi

if [ "$hwVersion" = "v4Rev1" ] || [ "$hwVersion" = "v6Rev1" ] || [ "$hwVersion" = "v7Rev1" ] || [ "$hwVersion" = "v7Rev2" ]
then
   if ! grep -Fxq "overlays=uart1 uart2 uart3 usbhost1 usbhost2 usbhost3 i2c0" /boot/armbianEnv.txt
   then
       echo "Change overlays"
       sed -i -E "s/(overlays=).*/overlays=uart1 uart2 uart3 usbhost1 usbhost2 usbhost3 i2c0/" /boot/armbianEnv.txt
   fi
else
   if ! grep -Fxq "overlays=uart1 uart2 uart3 usbhost1 usbhost2 usbhost3 i2c0 spi-enable" /boot/armbianEnv.txt
   then
       echo "Change overlays"
       sed -i -E "s/(overlays=).*/overlays=uart1 uart2 uart3 usbhost1 usbhost2 usbhost3 i2c0 spi-enable/" /boot/armbianEnv.txt
   fi
fi

# Might not be needed anymore... test without?
if ! grep -Fxq "param_uart3_rtscts=1" /boot/armbianEnv.txt
then
    echo "Change overlays, add uart3 rtscts"
    sed -i '$a param_uart3_rtscts=1' /boot/armbianEnv.txt
fi

if [ "$hwVersion" = "v1Rev1" ] || [ "$hwVersion" = "v2Rev1" ] || [ "$hwVersion" = "v3Rev1" ] || [ "$hwVersion" = "v3Rev2" ] || [ "$hwVersion" = "v4Rev1" ] || [ "$hwVersion" = "v5Rev1" ] || [ "$hwVersion" = "v6Rev1" ]
then
   :
else
  # Install hwclock
  apt-get install util-linux-extra
  # Add the RTC module
  if ! grep -Fxq "rtc_pcf8563" /etc/modules
  then
    echo "add rtc_pcf8563 to /etc/modules"
    echo "rtc_pcf8563" >> /etc/modules
  fi

  if [ ! -f /usr/lib/udev/rules.d/51-udev-rtc.rules ]; then
    echo "Make symlink to rtc1 which probably is the pcf8563"
    echo 'SUBSYSTEM=="rtc", KERNEL=="rtc1", SYMLINK+="rtc", OPTIONS+="link_priority=-100"' >> /usr/lib/udev/rules.d/51-udev-rtc.rules
  fi
  systemctl disable chrony
fi

echo "###################################"
echo "update bluetooth service"
echo "###################################"

if ! grep -Fq 'compat' /lib/systemd/system/bluetooth.service
then
    echo "change to compat mode"
    # previous exec path: /usr/lib/bluetooth/bluetoothd
    sed -i -E "s@(ExecStart=).*@ExecStart=/usr/libexec/bluetooth/bluetoothd --compat --noplugin=sap@" /lib/systemd/system/bluetooth.service
    systemctl daemon-reload
else
    echo "compat"
fi

if [[ $hwOption < 8 ]]; then
    echo "Add SP service"
    if ! grep -Fxq 'ExecStartPost=/usr/bin/sdptool add SP' /usr/lib/systemd/system/bluetooth.service
    then
        echo "add SP profile"
        sed -i '/ExecStart=.*/a ExecStartPost=/usr/bin/sdptool add SP' /usr/lib/systemd/system/bluetooth.service
        systemctl daemon-reload
    else
        echo "SP profile already exist"
    fi
fi