Remote replied unexpectedly to 'vMustReplyEmpty': vMustReplyEmpty

[sandbornm]

Hello,

I have followed the setup in the README up to the command:

arm-none-eabi-gdb -x run.gdb hello.elf

which results in the following output from within gdb:

Remote replied unexpectedly to 'vMustReplyEmpty': vMustReplyEmpty

Apparently, this is an issue with the debug bridge not supporting newer gdb versions (see: pulp-platform/debug_bridge#9). Is there a known workaround for this by using/modifying existing farjump code or scripts (e.g. adjusting installed gdb version)?

I am using the suggested USB to TTL cable (https://www.adafruit.com/product/954) with target Rpi 3B+ on an Ubuntu 20.04 host.

Thank you!

[cristianochenet]

Hi. I have the same issue. I am also interested in the solution.

[Vilbrequin]

In my case i use NXP S32K142 EVAL, I face the same problem using the arm gcc toolchain, but the solution in my cae is to use the use gdb client arm-none-eabi-gdb.exe located in the SDK installation path, so try to use the same version of gdb client