build.sh

#!/bin/bash
set -e

function enable_i2c {
    if command -v raspi-config &> /dev/null; then
    if [[ $(sudo raspi-config nonint get_i2c) -eq 1 ]] ; then
        echo "Enabling i2c"
        sudo modprobe i2c-dev
        sudo raspi-config nonint do_i2c 0
    fi
    if [[ $(grep -c '^dtparam=i2c_arm=on$' /boot/config.txt) -ge 1 ]] ; then
        echo "Setting the i2c clock speed to 400 kHz, you will have to reboot for this to take effect."
        sudo sed -i -e 's/dtparam=i2c_arm=on$/dtparam=i2c_arm=on,i2c_arm_baudrate=400000/g' /boot/config.txt
    elif [[ $(grep -c '^dtparam=i2c_arm=on$' /boot/firmware/config.txt) -ge 1 ]] ; then
        echo "Setting the i2c clock speed to 400 kHz, you will have to reboot for this to take effect."
        sudo sed -i -e 's/dtparam=i2c_arm=on$/dtparam=i2c_arm=on,i2c_arm_baudrate=400000/g' /boot/firmware/config.txt
    fi
    else
		echo "Can not automatically enable i2c you might have to do this manually"
	fi
}

DEBUG=""

while getopts ":s:d" opt; do
  case $opt in
    s)
	  SILENT=true
	  command shift
      ;;
    d)
      DEBUG="-DENABLE_DEBUG -DSERIAL_DEBUG"
	  command shift
      ;;
  esac
done
echo "Building OpenSprinkler..."

#Git update submodules

if git submodule status | grep --quiet '^-'; then
    echo "A git submodule is not initialized."
    git submodule update --recursive --init
else
    echo "Updating submodules."
    git submodule update --recursive
fi

if [ "$1" == "demo" ]; then
	echo "Installing required libraries..."
	apt-get install -y libmosquitto-dev libssl-dev
	echo "Compiling demo firmware..."

    ws=$(ls external/TinyWebsockets/tiny_websockets_lib/src/*.cpp)
    otf=$(ls external/OpenThings-Framework-Firmware-Library/*.cpp)
    g++ -o OpenSprinkler -DDEMO -DSMTP_OPENSSL $DEBUG -std=c++14 -include string.h -include cstdint main.cpp OpenSprinkler.cpp program.cpp opensprinkler_server.cpp utils.cpp weather.cpp gpio.cpp mqtt.cpp notifier.cpp smtp.c RCSwitch.cpp -Iexternal/TinyWebsockets/tiny_websockets_lib/include $ws -Iexternal/OpenThings-Framework-Firmware-Library/ $otf -lpthread -lmosquitto -lssl -lcrypto
else
	echo "Installing required libraries..."
	apt-get update
	# Switched from libgpiod-dev to liblgpio-dev
	apt-get install -y libmosquitto-dev libi2c-dev libssl-dev liblgpio-dev
    enable_i2c

	# Switched linker flag from libgpiod to liblgpio
	GPIOLIB="-llgpio"

	echo "Compiling ospi firmware..."

    ws=$(ls external/TinyWebsockets/tiny_websockets_lib/src/*.cpp)
    otf=$(ls external/OpenThings-Framework-Firmware-Library/*.cpp)
    g++ -o OpenSprinkler -DOSPI -DSMTP_OPENSSL $DEBUG -std=c++14 -include string.h -include cstdint main.cpp OpenSprinkler.cpp program.cpp opensprinkler_server.cpp utils.cpp weather.cpp gpio.cpp mqtt.cpp notifier.cpp smtp.c RCSwitch.cpp -Iexternal/TinyWebsockets/tiny_websockets_lib/include $ws -Iexternal/OpenThings-Framework-Firmware-Library/ $otf -lpthread -lmosquitto -lssl -lcrypto -li2c $GPIOLIB

fi

if [ -f /etc/init.d/OpenSprinkler.sh ]; then
    echo "Detected the only init.d start up script, removing."
    echo "If you still want OpenSprinkler to launch on startup make sure when you run the build script to answer \"Y\" to the following question."
    /etc/init.d/OpenSprinkler.sh stop
    rm /etc/init.d/OpenSprinkler.sh
fi

if [ ! "$SILENT" = true ] && [ -f OpenSprinkler.service ] && [ -f startOpenSprinkler.sh ] && [ ! -f /etc/systemd/system/OpenSprinkler.service ]; then

	read -p "Do you want to start OpenSprinkler on startup? " -n 1 -r
	echo

	if [[ ! $REPLY =~ ^[Yy]$ ]]; then
		exit 0
	fi

	echo "Adding OpenSprinkler launch service..."

	# Get current directory (binary location)
	pushd "$(dirname $0)" > /dev/null
	DIR="$(pwd)"
	popd > /dev/null

	# Update binary location in start up script
	sed -e 's,\_\_OpenSprinkler\_Path\_\_,'"$DIR"',g' OpenSprinkler.service > /etc/systemd/system/OpenSprinkler.service

	# Make file executable
	chmod +x startOpenSprinkler.sh

    # Reload systemd
    systemctl daemon-reload

    # Enable and start the service
    systemctl enable OpenSprinkler
    systemctl start OpenSprinkler
fi

echo "Done!"