Bale Wrapper reversing

[wakka79]

Version

8.1.0.3

SP/MP

SP (Singleplayer)

What is your question about?

Course creation

What is your question?

Ive noticed recently that the Bale Wrappers will pick up a bale, wrap it, place it down and reverse away. This often results in the bale (particularly round bales on slopes) rolling into the tractor or the wrapper and blocking it. Is this intended? There is usually lots of room in front of the wrapper, well and truely enough for the tractor to drive away forwards but it instead reverses. Thoughts?

Screenshots

No screenshots.

[Legion68]

Das liegt 100% an dein Mods Ordner

[wakka79]

The behaviour to reverse is due to the mods that I have? Seems strange. Would you have any idea why though?

[Legion68]

Kann an ein Mod oder Script liegen
Bei mir macht er das Richtig mit Ballenwickeln und Fährt vorwärts weiter so wie es sein soll
Und deine Log Datei ?
Am besten nur mit CP Testen und dann nach und nach wieder Mods und Scripte reinnehmen biss das wieder auftritt
Dann den verursacher raus damit
Und nicht nur Mods und Scripte deaktievieren das funktioniert nicht immer raus aus den Mods Ordner und pdlc Ordner
Und immer erst vor den Testen jim_cache Ordner , shader_cache Ordner löschen

[wakka79]

log.txt

My log attached.

I hadnt changed many mods before I noticed it so I wasnt sure that it would be a mod conflict.

[Legion68]

Erstmal die ganzen Lua Fehler beseitigen
Und über OneDrive Mods usw. laden ist der Killer bei FS war schon immer so nur mal als Tip
Steht auch in etlichen Foren drin

[hpmc13]

I was having the same problem, and it was definitely a Mod. CourseplayGPS was causing it for me. Removed that mod and all is well. Certainly not a Courseplay issue.

[wakka79]

Thanks Ill give it a shot!

[Legion68]

CourseplayGPS

Courseplay GPS für FS25 gibt es Nicht

[Crinouche]

C'est entièrement dû à votre dossier de mods.

I don't think so. I just ran some tests.

[Crinouche]

I've removed all my mods and and ran several tests.

I think the problem is with the KUHN SW 4014.
I tested the GEWEIL G 5020 and it works normally. But with the KUHN SW 4014, the behavior is strange. The machine reverses a lot. Similarly, it picks up a bale, wraps it, then goes to the other end of the field to wrap another, then returns to the starting point. It doesn't go as close as possible. I tested with several versions of Courseplay.

8100: No problem
8101: No problem
8102: Not working normally
8103: Not working normally

I've attached the differents logs.

log kuhn sw 4014 CP 8100.txt
log kuhn sw 4014 CP 8102.txt
log kuhn sw 4014 CP 8103.txt

log goweil G5020 CP 8103.txt

I have a video but I can't upload it here. I don't know why

[hpmc13]

I don't think so. I just ran some tests.

I think you're right, and I prematurely blamed CourseplayGPS. I've also found that the KUHN SW 4014 seems to be the problem - or at least is acting as it's the problem. I cleared out my mods folder except for CP and EDC, deleted the shader cache, and started a new save on RBS. I'm seeing the same things that you are.

8.1.0.1 works fine.
8.1.0.3 reverses, drives off the field, and/or stays in one place after dropping a bale.
The Geweil works as expected on any CP version.

I tried a round bale wrapper mod (McCale) and it worked fine as well. All the square bale wrapper mods that I've found are variations of the Kuhn 4014 and have the same issues as the ingame 4014. I can not find a modded square bale wrapper that is not a variation of the Kuhn.