Installation on an OpenWRT router.

[paolosezart]

Is it possible to install dysk on a router with a MediaTek MT7620A processor?
Cpuinfo data:

system type		: MediaTek MT7620A ver:2 eco:6
machine			: Zbtlink ZBT-WE826 (16M)
processor		: 0
cpu model		: MIPS 24KEc V5.0
BogoMIPS		: 385.02
wait instruction	: yes
microsecond timers	: yes
tlb_entries		: 32
extra interrupt vector	: yes
hardware watchpoint	: yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
isa			: mips1 mips2 mips32r1 mips32r2
ASEs implemented	: mips16 dsp
Options implemented	: tlb 4kex 4k_cache prefetch mcheck ejtag llsc pindexed_dcache userlocal vint perf_cntr_intr_bit perf
shadow register sets	: 1
kscratch registers	: 0
package			: 0
core			: 0
VCED exceptions		: not available
VCEI exceptions		: not available

Hwinfo parameters:
hwinfo.txt

[Canop]

Compilation does work (I just tested using https://github.com/casonadams/cross-compiler-rs) but I have no way to check whether dysk really works on this platform.

[paolosezart]

Can you post the compiled file here? I'll check it and post it.

[Canop]

https://dystroy.org/dysk/download/openwrt/

[paolosezart]

[Canop]

Cool.
note: Use df -H instead of df -h to get ISO units.

As your terminal is lacking some chars, you should probably use dysk --ascii. Not ideal but prettier than that square.

[paolosezart]

The thing is that I have two drives mounted, one USB (64Gb) and the second MicroSD (8Gb):

Therefore, as I understand the mapping is wrong.

About "df -H" such argument is not supported: