The automatic identification of my ISH 1030 fails. See log below.
[11:16:42][D][tc_bus:876]: Identifying device model (Category 0) using serial number: 628747...
[11:16:42][D][tc_bus:419]: Sending Command - Type: SELECT_DEVICE_GROUP | Address: 0 | Payload: 0x0 | Serial-Number: 628747 | Length: 16-bit | Raw Data: 0x00005800
[11:16:42][D][text_sensor:064]: 'Last Bus Command': Sending state '5800'
[11:16:42][D][sensor:093]: 'Heap Free': Sending state 85920.00000 B with 0 decimals of accuracy
[11:16:42][D][sensor:093]: 'Heap Max Block': Sending state 30720.00000 B with 0 decimals of accuracy
[11:16:42][D][sensor:093]: 'Free PSRAM': Sending state 6659336.00000 B with 0 decimals of accuracy
[11:16:42][D][tc_bus:685]: Received command 0x00005800, but ignoring it as it matches the last sent command.
[11:16:42][I][remote.raw:041]: Received Raw: -6024, 1976, -2005, 3995, -2006, 3994, -4010, 1990, -2005, 1995, -2006, 1994, -2005, 1995, -2006, 1994, -2005, 1995, -2006, 2232, -5711, 2079, -1901, 2079, -1901, 4097, -1904
[11:16:43][D][tc_bus:419]: Sending Command - Type: REQUEST_VERSION | Address: 0 | Payload: 0x0 | Serial-Number: 628747 | Length: 32-bit | Raw Data: 0x59980BC0
[11:16:43][D][text_sensor:064]: 'Last Bus Command': Sending state '59980BC0'
[11:16:43][D][tc_bus:685]: Received command 0x59980BC0, but ignoring it as it matches the last sent command.
[11:16:43][E][tc_bus:294]: Unable to identify Hardware! Unknown model. Data received: 08080048
[11:16:43][I][remote.raw:028]: Received Raw: -6020, 3980, -2006, 3994, -2006, 3994, -4009, 1991, -2005, 3995, -4011, 1989, -2005, 3995, -4009, 1991, -2005, 1995, -2006, 1994, -2005, 1995, -4011, 1989, -4009, 3991, -4011, 3989, -2006, 1994, -2005, 1995, -2006, 1994, -4010, 2623, -6665,
[11:16:43][I][remote.raw:041]: 4466, -2199, 2272, -2199, 2279, -4431, 2271, -2199, 2272, -2198, 2272, -2199, 2282, -4430, 2271, -2200, 2271, -2199, 2271, -2200, 2271, -2199, 2272, -2198, 2272, -2199, 4469, -2199, 2282, -4430, 2272, -2199, 2253, -4431
Description
The automatic identification of my ISH 1030 fails. See log below.
Label inside indoor station:
Product description: https://www.tcsag.de/fileadmin/user_upload/TCS_DE/Metanavigation/Downloads/ARCHIV/Innenstationen/PI_ISH1030_1A.pdf
Logs
Which version of the ESPHome Doorman firmware config are you running?
Latest dev (commit 1dc6693).
If you're using an ESPHome YAML config, which version of ESPHome are you running?
configurations/esp32-s3.ha.stock.dev.yaml